Kramer VP-793 Руководства по эксплуатации онлайн [16/31] 140338

3.3.

Main Menu

The main menu lists the input channel select item, 6 sub menus, and a menu item for automatic setup

of VGA modes. The 6 sub menus are Output, Color, Geometry, Multiple Unit, Enhancement and

System.

On each menu page an Exit menu item is available to leave the menu or submenu. The menu may also

be left by pressing the up and down key simultaneously.

The menu system is contextual. Some adjustments are not applicable to all signal types or operating

modes, in which case those non-applicable functions will be ghosted or greyed out and are not

accessible.

All menus have a top status line and a bottom line indicating the firmware revision number. In the status

line the currently selected input channel is indicated and the detected mode is identified. The firmware

revision number displays the revision number of the boot-loader behind BL, the revision number of the

firmware behind FW and the model number VP-793 of the unit.

Navigating the menu system or changing values is done with the up and down keys. In the following

sections the set-up method using the up and down keys is described.

To set up your VP-793 it is recommended that you follow this procedure:

Choose the correct output mode and parameters to suit your screen or projector.

Select the correct input signal.

Set the input levels and features appropriately to optimize the appearance of your image.

Set any other parameters to suit your application.

Note: All Input parameters are specific to your chosen input channel and input signal type, they are not

global to the unit. All Output parameters are specific to the output so will appear to be global.

3.4.

Input

In addition to the front panel buttons the list of available inputs can be scrolled through in the Input menu

using the Up and Down keys. The new input is not selected until the Menu key is pressed. The list of

inputs are: VGA, DVI, HDMI and Test Pattern.

Test patterns can be generated by VP-793 without needing an input connected. When Test Pattern is

selected as the input, the required test pattern can be chosen with the menu navigation up and down

keys when the menu system has been exited, or it can be selected in menu>System>Input Config>Test

Pattern Setup.

3.5. Output

This menu contains adjustments associated with setting up outputs from the unit. The items are

organized in three sub menus, Display Type, Gamma/Color/Crush and Output Config. Use the up and

down keys to scroll to the required item and press the Menu key.

3.5.1. Display Type

Settings: LCD/Plasma, Projector

The Display Type setting defaults to Projector. When set to LCD/Plasma Multiple unit configurations

with auto zoom are available, but without edge blend. Note: For VP-793 leave the setting to Projector

mode, since for this model essentially there is no difference to LCD/Plasma mode.