Kramer VP-796 Руководства по эксплуатации онлайн [19/38] 140340

of December 2015 19

4.2.

Web Browser Control

The unit can be remotely controlled from a PC (or tablet, or smartphone, …). No extra software needs

to be installed on the PC. The PC web browser is used as the graphical user interface for all control

items. To connect to the unit the TCP/IP address of the unit has to be entered into the address list box

of the web browser in the following format http://xxx.xxx.xxx.xxx. The TCP/IP address assigned to the

unit can be found in the System/Network Settings menu.

The Network Settings menu of the unit allows to configure the unit’s TCP/IP address. Under Address

Type a static or DHCP leased address can be chosen. The factory default of the unit is DHCP. The

static address and Netmask needs to be entered manually.

The Network Settings menu has a section with information on the DHCP Status and IP address

assigned to the board, as well as the fixed MAC Address programmed into the board. The DHCP status

is Off when static assignment is used or it displays an address when DHCP has leased an address

accordingly or it is None assigned if the lease was not successful.

Note: When changing from DHCP to Static mode or vice versa it is strongly recommended that the unit

is powered down after such a change, then powered back up, so that it is properly recognised by other

devices on the network.

Kramer provides a DiscoveryTool.exe Windows application to identify Kramer boxes in the network.

http://www.calibreuk.com/downloads/LEDView/DiscoveryTool_V1.0.exe

Clicking on the link of the recognized box will open a browser and make a connection to the

corresponding box. The box identifier is made up of “PV7” in followed by the MAC address. The MAC

address of the box can be found in the System/Network Settings menu.

Note: This is for use on a network not on a single wire connection.

Once the address has been entered into the web browser starts to load pages from the unit mirroring

the menu system. All menu items are shown as their respective buttons, sliders and list boxes and can

be accessed and altered with the PC mouse or corresponding navigational key presses.

To control the unit through a network start a Web Browser and enter the TCP/IP address of the unit in

the address field of the browser. The web server will ask for a user name and password which are:

User Name: user

Password: user

A “Loading… Please Wait.” message will appear in the browser window and the web server of the unit

will mirror the menu into the browser.