Kramer Aspen RCP-3232 [17/52] Configuration

SIERRA VIDEO

Configuration

Ethernet Setup

Default IP settings;

IP Address- 192.168.1.250

Subnet mask- 255.255.255.0

Gateway IP Address- 0.0.0.0

Telnet Port- 10001

To configure the IP port, the control panel must first be connected to your PC. This can

be done by connecting cable to your PC and the control panel directly, or added to your

existing network. The RCP defaults to an IP address of 192.168.1.250 which will not

conflict with other devices in most systems. If there is an IP address conflict, direct

connection must be used to configure the control panel’s Ethernet port. The IP Address

can also be changed from the front panel (See the chapter on “Operation” for details.)

Once your PC and the RCP are on the same Ethernet network, open your internet

browser and type in the default address of the RCP in the address line of the internet

browser.

This will open a web page generated by the RCP. RCP information is displayed on this

page.

Chapter