Al-Ko 2000i [26/188] Changing the spark plug

Al-Ko 2000i [26/188] Changing the spark plug
GB
Original instructions for use
26
Petrol Generator INVERTER 2000i
6. Remove engine cover ( 3/2)
7. Unscrewtheoilllinglidandstoreitinaclean
place. (
4/1)
8. Place an oil collection container under the engine.
9. Tilt the generator to fully drain the oil.
10. Place machine again on an even horizontal surface.
Observellingamountandoilgrade(seeoperat-
ing materials)
Important!
Donottiltthegeneratorwhilellingitwithoil-
Fillingbeyondthemaximumllinglevelcandam-
age the engine
11. Add new engine oil (
5),observemaximumlling
level (
6)
If engine oil has leaked out:
Do not start the engine
Absorb leaked engine oil using an oil binding
agent or cloth and dispose properly
Clean the machine
12. Cleanandtightlyclosetheoilllinglid.
13. Insert and tighten engine cover
Do not dispose of waste oil:
in domestic waste
by pouring it into the canalisation, drain, or
onto the ground
Drop off waste oil in a closed container at a recycling
centre or a customer service centre.
Cleaning the fuel tank screen ( 18)
Important – Danger of explosion!
Donotsmokeandnonakedameswhen
handling petrol
1. Unscrew the fuel tank lid.
2. Remove the fuel tank screen
3. Clean the fuel tank screen using petrol
4. Rub fuel tank screen dry
5. Insert fuel tank screen
If petrol has leaked out:
Do not start the engine
Avoid start attempts
Clean the machine
Haveenginecooldownbeforerellingwith
petrol to avoid spilling
Spilled fuel can lead to damage to plastic parts.
Immediately wipe off fuel. Warranty does not
cover damage to plastic parts caused by fuel
6. Tightlyclosethetankllingopening
Changing the spark plug
1. Remove the cover from the housing ( 19/1)
2. Disconnect the spark plug connector (
19/2)
3. Attach the spark plug wrench (
20/4) through the
opening to the spark plugs
4. Insert bar (
20/3) through the spark plug wrench
(
20/4)
5. Unscrew spark plug by turning the spark plug
wrench
6. Insert new spark plug
Observe the spark plug type (see Technical data)
7. Tighten the spark plug using the spark plug wrench
Observe the torque! 20 Nm
8. Remove the spark plug wrench
9. Install the cover to the housing
Maintenance intervals
Before every use
Check the engine oil level
Inspecttheairlter
Visual inspection for damage
After20operatinghoursor1monthafterrstuse
Oil change
Every 100 operating hours or every 6 months
Cleantheairlter
2)
Oil change
Clean the spark plug
Every 300 operating hours, or once per year
Replace the spark plug

Содержание

Похожие устройства

Скачать