B.Well wf-2000 [8/82] English infrared forehead thermometer

INSTRUCTIONS FOR A CORRECT USE

MEASUREMENT OF THE FOREHEAD TEMPERATURE (HEAD)

1) Make sure that the probe is clean and integral.

2) Clean the temple where the probe will lean.

3) Switch on the thermometer, by pressing the key “ON/MEM”.

On the display appear all the function symbols (self-test); after

few seconds, the display shows the message “HEAD-C°” and

emits two beeps. At this point, the thermometer is ready for

use.

Lean the probe on the right or left temple;

press the key

SCAN and keep it pressed, then slowly move the probe around

the temple.

The thermometer emits beeps indicating that the measurement

is taking place.

5) A longer and more intense acoustic signal indicates that

the measurement has ended (Time necessary to perform the

measurement ranges from 5 to 30 second according to the

temperature of the person).

Should the temperature exceed 37.5°C, the thermometer emits

a long beep followed by other three shorter beeps.

6) Release the key SCAN and then detach the probe from the

temple; read the measured value on the display

NB:

the temperature shown on the display is equal to the oral

temperature, i.e. temperature measured on the forehead is

translated as if it were measured in the mouth.

7) The device switches oﬀ automatically after 1 minute, if it is

not used.

MEASUREMENT OF THE ROOM TEMPERATURE (

)

This thermometer allows the measurement of the room temperature.

1) Switch on the thermometer, by pressing the key “ON/MEM”.

On the display appear all the function symbols (self-test); after

few seconds, the display shows the message “HEAD-C°” and

emits two beeps.

2) Keep the key “ON/MEM” pressed and then press the key SCAN.

English INFRARED FOREHEAD THERMOMETER

MEASUREMENT OF THE ROOM TEMPERATURE (

)