B.Well wf-2000 [9/82] Wf 2000 instructions and warranty

WF-2000Instructions and warranty

The display shows the icon “ ” (HEAD disappears).

3) If you wish to measure the temperature on a precise point,

press the key SCAN.

The thermometer measures the temperature in 0.6 seconds.

If the SCAN key is kept pressed, temperature is updated

continuously.

4) The device switches oﬀ automatically after 1 minute, if it is

not used. When it is switched on again, the display shows the

forehead temperature measurement function (HEAD).

CELSIUS/FAHRENHEIT

This thermometer can measure temperature both in Celsius and

Fahrenheit degrees.

Each time you wish to change the measurement unit, proceed as

follows:

1) With switched oﬀ thermometer, keep the key SCAN pressed

without releasing it for some seconds, and then press

contemporaneously the key ON/MEM until the displays shows

°F (or °C).

2) The thermometer emits two beeps; at this point, release the

key SCAN and the key ON/MEM.

Now the measurement unit has been changed.

Proceed with the measurement according to paragraph

“INSTRUCTIONS FOR A CORRECT USE”.

MEMORY FUNCTION

This device stores in memory the last 25 measurements performed

to evaluate eventual variations. The measurements are stored auto-

matically after that the thermometer has switched oﬀ.

Only forehead temperatures (HEAD) included between 22°C and

42.2°C (71.6°F and 108.0 °F) are stored.

After the ﬁrst 25 measurements, the oldest data are erased automati-

cally.

To call up saved measurements, switch on the thermometer, and

press the key ON/MEM (Every time the key is pressed, saved data are