B.Well wa-33 с адаптером [14/63] Instruction manual wa 33

B.Well wa-33 с адаптером [14/63] Instruction manual wa 33
Instruction manual
WA-33
14
d) When the measurement has been concluded, a long beep tone sounds. The measured systolic and diastolic
blood-pressure values as well as the pulse frequency are now displayed.
e) The appearance of the symbol signies that an irregular heartbeat was detected.
This indicator is only a caution. It is important that you be relaxed, remain still and do not talk during measurements.
NOTE: We recommend contacting your physician if you see this indicator frequently.
f) The measurement results are displayed, until you switch the device o. If no button is pressed for 1 minutes, the
device switches automatically o, to save the batteries.
5.4. Measuring procedure
After the cu has been appropriately positioned the measurement can begin:
a) Press the («O/I+Memory button»), pump begins to inate the cu. In the display, the increasing
cu-pressure is continually displayed.
b) After reaching the ination pressure, the pump stops and the pressure slowly falls away.
The cu-pressure (large characters) is displayed during the measurement.
c) When the device has detected the pulse, the heart symbol in the display begins to blink and a peep
tone is audible for every pulse beat.

Содержание