Beko css 54010 gw [17/100] Gas conversion

Содержание

Vibrations during use may cause cooking vessels to move This dangerous situation can be avoided if the product is level and balanced For your own safety please ensure the product is level by adjusting the four feet at the bottom by turning left or right and align level with the work top Final check 1 Reconnect the product to the mains 2 Check electrical functions 3 Open gas supply 4 Check gas installations for secure fitting and tightness 5 Ignite burners and check appearance of the flame _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ T lFlame must be blue and have a regular L 1 JshaPe the f ame is yellowish check if the urner cap is seated securely or clean the burner Gas conversion DANGER Before starting any work on the gas installation disconnect the gas supply There is the risk of explosion In order to change your appliance s gas type change all injectors and make flame adjustment for all valves at reduced flow rate position Exchange of injector for the burners 1 Take off burner cap and burner body 2 Unscrew injectors by turning the counter clockwise 3 Fit new injectors 4 Check all connections for secure fitting and tightness B Jew Injectors have their position narked on their packing or injector able on Injector table page 13 can be eferred to 1 2 3 4 Flame failure device model dependant Spark plug Injector Burner Unless there is an abnormal condition do not attempt to remove the gas burner taps You must call an Authorised service agent If it is necessary to change the taps Reduced gas flow rate setting for hob taps 1 Ignite the burner that is to be adjusted and turn the knob to the reduced position 2 Remove the knob from the gas tap 3 Use an appropriately sized screwdriver to adjust the flow rate adjustment screw For LPG Butane Propane turn the screw clockwise For the natural gas you should turn the screw counter clockwiseonce The normal length of a straight flame in the reduced position should be 6 7 mm 4 If the flame is higher than the desired position turn the screw clockwise If it is smaller turn anticlockwise 5 For the last control bring the burner both to high flame and reduced positions and check whether the flame is on or off Depending on the type of gas tap used in your appliance the adjustment screw position may vary 17 EN

Скачать