Beko cse 52110 gw [15/96] Gas conversion

Содержание

There must be a flex pipe at the outlet of the installation for the natural gas connection of your product and the tip of this pipe must be closed with a blind plug Service Representative will remove the blind plug during connection and connect your product by means of a straight connection device coupling Make sure that the natural gas valve is readily accessible If you need to use your product later with a different type of gas you must consult the Authorised Service Agent for the related conversion procedure B DANGER The gas hose must not be clamped bent or trapped or come into contact with hot parts of the product Gas conversion DANGER Before starting any work on the gas installation disconnect the gas supply There is the risk of explosion n order to change your appliance s gas type change all injectors and make flame adjustment for all valves at reduced flow rate position Exchange of injector for the burners 1 Take off burner cap and burner body 2 Unscrew injectors by turning the counter clockwise 3 Fit new injectors 4 Check all connections for secure fitting and tightness lew Injectors have their position narked on their packing or injector able on Injector table page 12 can be eferred to E There is the risk of explosion due to damaged gas hose Push the product towards the kitchen wall Adjusting the feet of oven Vibrations during use may cause cooking vessels to move This dangerous situation can be avoided if the product is level and balanced For your own safety please ensure the product is level by adjusting the four feet at the bottom by turning left or right and align level with the work top Final check 1 Check electrical functions 2 Open gas supply 3 Check gas installations for secure fitting and tightness 4 Ignite burners and check appearance of the flame ___________________________ J FIame must be blue and have a regular Jshape If the flame is yellowish check if the Aurner cap is seated securely or clean the burner L 1 2 3 4 Flame failure device model dependant Spark plug Injector Burner nless there is an abnormal condition do ot attempt to remove the gas burner taps ou must call an Authorised service agent if is necessary to change the taps B Reduced gas flow rate setting for hob taps 1 Ignite the burner that is to be adjusted and turn the knob to the reduced position 2 Remove the knob from the gas tap 3 Use an appropriately sized screwdriver to adjust the flow rate adjustment screw For LPG Butane Propane turn the screw clockwise For the natural gas you should turn the screw counter clockwiseonce 15 EN

Скачать
Случайные обсуждения