Netis WF-2404 WF-2404D [40/63] Wireless security

300Mbps Wireless-N Broadband Router User Manual

Figure 4-24

 Wireless network status: You can choose “enable” or “disable” to enable or disable the

“Wireless Network Status”, if what you choose is “Disable”, the AP function of wireless

router will be turned off.

 SSID: The default is trst1.

 Radio band: You can select the wireless standards running on your network, if you have

Wireless-N, and Wireless-B/G devices in your network, keep the default setting,

802.11b+g+n

 Radio mode: You can select radio mode of wireless router, it contains Access Point, Client,

AP+WDS and WDS. The default setting is AP mode.

 MAC: Wireless router’s physical address.

 SSID Broadcasting: You can select “enable” or “disable” to enable or disable the broadcast

SSID function, If the setting of this field is disable, wireless client can’t obtain this SSID to

 Channel width: This switch allows you to set Router's wireless bandwidth. 20MHz: In this

mode you can get low bandwidth, little interference and slow rate. 40MHz: In this mode

you can get high bandwidth, high interference and rapid rate. Use only when you have a

pure router, draft 802.11n wireless network.

 Channel sideband: It controls your wireless router use higher or lower channel when

working on 40MHz.

 Region: please select the region where you live in.

 Channel: In 20MHz, you can select one channel from 1 to 13 manually, and in 40MHz,

you can select one channel from 1 to 9 or 5 to 13, which provides a choice of avoiding

interference.

4.5.2. Wireless Security

The item allows you to encrypt your wireless communication, and you can also protect your