Canon imagePROGRAF iPF6300 Инструкция по эксплуатации онлайн [846/1126] 151567

Important

• This function is not available with CAD Tracing Paper or CAD Translucent Matte Film.

If adjustment is not possible as expected using highly transparent film or similar media, try another type of

paper, or try Manual adjustment.

(See "Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.829

Note

• Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type

of paper as you will use for printing. Even if you will print on a different type of paper, we recommend using

Auto(Advanced) for adjustment.

When Using Rolls An unused roll at least 10 inches wide

When Using Sheets Auto(Standard) : Two sheets of unused paper, A4/Letter size

Auto(Advanced) : Ten sheets of unused paper, A4/Letter size (or five sheets when using A2)

Auto(Expansion) : Seven sheets of unused paper, A4/Letter size (or four sheets when using A2)

Perform adjustment as follows.

1. Load paper.

• Loading Rolls on the Roll Holder →P.781

• Loading Rolls in the Printer →P.784

• Loading Sheets in the Feed Slot →P.809

4. Press ▲ or ▼ to select Adjust Printer, and then press the OK button.

Adjustments for Better Print Quality

>

Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.) iPF6300S

7