![Canon imagePROGRAF iPF750 [699/878] Ipf750](/img/pdf.png)
Canon imagePROGRAF iPF750 [699/878] Ipf750
![Canon imagePROGRAF iPF750 [699/878] Ipf750](/views2/1165713/page699/bg2bb.png)
Setting Item Description, Instructions
System
Setup
Keep Paper Size Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the print-
er driver does not match the margin in the printer
menu
TrimEdge Reload Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut the
edge if you are concerned about any marks left on the
roll when the roll is left in the retracted position.
Specify On to have rolls cut when printing begins af-
ter Sleep mode or when the power is restored. Select-
ing Automatic will trim the edge when the roll has
been in the retracted position for two days or more.
Rep.P.head Print Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead. (See "Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.).") →P.619
Nozzle Check In Frequency, specify the timing for automatic checks
of nozzle clogging. Choose Standard to have the
printer adjust the timing for checks based on the fre-
quency of nozzle use. Choose 1 page to check once
per page.
Select Warning > On to display warnings if the noz-
zles clog during printing.
Use RemoteUI Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Reset PaprSetngs Restores settings that you have changed with Media
Configuration Tool to the default values.
Show Job Log Selecting Off prevents display of the log in Job Menu
> Job Log. Additionally, the log is not printed if you
choose Job Menu > Print Job Log. Note that because
job logs are not collected, the Status Monitor account-
ing functions will not work correctly.
Prep.MovePrinter Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.") →P.762
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Admin.
Menu
Change Password By setting a password, you can restrict menu display
and configuration as follows. You can input between 0
and 9999999.
Control Panel
>
Printer Menu
>
iPF750
Menu Settings
8
683
Содержание
- Adjustments for better print quality 1
- Appendix 1
- Basic printing workflow 1
- Control panel 1
- Enhanced printing options 1
- Error message 1
- Handling paper 1
- Large format printer 1
- Mac os x software 1
- Maintenance and consumables 1
- Network setting 1
- Printer parts 1
- Specifications 1
- Troubleshooting 1
- User s guide 1
- Windows software 1
- Adjusting images 51 3
- Basic printing workflow 1 3
- Canceling print jobs 14 3
- Choosing paper for printing 21 3
- Contents 3
- Enhanced printing options 20 3
- Pausing printing 19 3
- Printing cad drawings 39 3
- Printing photos and office documents 22 3
- Printing procedure 2 3
- Borderless printing 104 4
- Centering originals 161 4
- Printing at full size 89 4
- Printing banners or at other non standard sizes 120 4
- Printing enlargements or reductions 69 4
- Tiling and multiple pages per sheet 139 4
- Checking images before printing 188 5
- Conserving roll paper 174 5
- Other useful settings 190 5
- Preview 246 5
- Printer driver 207 5
- Windows software 206 5
- Color imagerunner enlargement copy 289 6
- Free layout 259 6
- Print plug in for office 303 6
- Accounting 393 7
- Hdi driver 358 7
- Status monitor 390 7
- Device setup utility 407 8
- Digital photo front access 406 8
- Mac os x software 431 8
- Media configuration tool 412 8
- Preview 457 8
- Printer driver 432 8
- Color imagerunner enlargement copy 518 9
- Free layout 486 9
- Handling paper 567 10
- Handling rolls 575 10
- Handling sheets 602 10
- Media configuration tool 543 10
- Paper 568 10
- Printmonitor 541 10
- Adjusting the feed amount 628 11
- Adjusting the printhead 619 11
- Adjustments for better print quality 618 11
- Control panel 648 11
- Operations and display screen 649 11
- Optional accessories 647 11
- Output stacker 611 11
- Printer menu 659 11
- Printer parts 638 11
- Printer parts 639 11
- Initial settings 699 12
- Ink tanks 731 12
- Mac os x settings 719 12
- Maintenance and consumables 730 12
- Maintenance cartridge 749 12
- Netware settings 708 12
- Network environment 693 12
- Network setting 692 12
- Other settings 726 12
- Printheads 739 12
- Using remoteui 696 12
- Cleaning the printer 756 13
- Consumables 767 13
- Frequently asked questions 769 13
- Other maintenance 762 13
- Printing does not start 783 13
- Problems regarding paper 771 13
- Problems with the printing quality 786 13
- The printer stops during a print job 785 13
- Troubleshooting 768 13
- Cannot print over a network 795 14
- Error message 808 14
- Error messages 809 14
- Hp gl 2 problems 799 14
- Installation problems 797 14
- Messages regarding paper 811 14
- Other problems 802 14
- Messages regarding hp gl 2 830 15
- Messages regarding ink 822 15
- Messages regarding printheads 826 15
- Messages regarding printing or adjustment 825 15
- Messages regarding the maintenance cartridge 828 15
- Other messages 831 15
- Printer specifications 835 15
- Specifications 834 15
- Appendix 839 16
- Disposal of the product 850 16
- How to use this manual 840 16
- Basic printing workflow 17
- Printing options using rolls and sheets 18
- Printing procedure 18
- Roll printing 18
- Sheet printing 19
- Turning the printer on 19
- Turning the printer on and off 19
- Turning the printer off 21
- Loading and printing on rolls 22
- Ipf750 23
- Load the roll in the printer 23
- Load the roll on the roll holder 23
- Loading and printing on sheets 25
- Printing in windows 27
- Printing from mac os x 28
- Registering the printer 28
- Printing from the application software 29
- Canceling print jobs 30
- Canceling print jobs from the control panel 30
- Canceling print jobs from windows 31
- Canceling print jobs from mac os x 32
- Pausing printing 35
- Enhanced printing options 36
- Choosing a paper for printing 37
- Choosing paper for printing 37
- Specifying paper in the printer driver 37
- Print targets for photos and images 38
- Printing photos and images 38
- Printing photos and office documents 38
- Printing photos and images windows 39
- Printing photos and images mac os x 41
- Print targets for office documents 45
- Printing office documents 45
- Printing office documents windows 46
- Printing office documents mac os x 48
- Using posterartist to compose originals 52
- Print targets for line drawings and text 55
- Printing cad drawings 55
- Printing line drawings and text 55
- Printing line drawings and text windows 56
- Printing line drawings and text mac os x 58
- Confirming the installation of printer driver optimization module for autocad 62
- Printing from autocad 62
- Installation of printer driver optimization module for autocad 63
- Specifying colors and printing cad drawings 63
- Color compatibility 64
- Specifying colors and printing cad drawings windows 64
- Hp gl 2 printing 66
- 1 if no color correction is selected the matching sheet matching pane is not displayed 67
- Adjusting images 67
- Adjusting the color in the printer driver 67
- Adjusting the color in the printer driver 51 fine tuning colors of photos and images windows 53 fine tuning colors of photos and images mac os x 57 67
- Choose how the printer driver processes color as desired the available options vary depending on the color mode 67
- Color adjustment 67
- Color mode 67
- Color settings specified in the application for your documents are essentially given priority over other settings for each print job but further color adjustment is possible in the printer driver 67
- Giving priority to particular graphic elements and colors for printing giving priority to particular graphic elements and colors for printing 60 choosing the document type and printing conditions windows 63 choosing the document type and printing conditions mac os x 66 67
- Ipf750 67
- You can adjust colors separately for images graphics and text documents 67
- Click object adjustment to open the object adjustment dialog box which allows you to select the color adjustment target from image graphics and text 68
- Ipf750 68
- Matching 68
- You can choose the color matching mode and method by adjusting the color matching mode and method you can make printed colors match the colors of on screen images more closely 68
- Be sure to calibrate your monitor colors correctly if you adjust the colors for printing if monitor colors are not calibrated correctly you may not obtain the desired printing results for instructions on monitor calibration refer to the documentation for your monitor and operating system for instructions on color adjustment refer to the following topics as appropriate for your computer and operating system 69
- Choose print in the application menu 69
- Fine tuning colors of photos and images windows 69
- Ipf750 69
- Select the printer in the dialog box and then display the printer driver dialog box see 69
- You can specify your own print settings instead of using the print target presets this topic describes how to fine tune the color tone of photos before printing 69
- Fine tuning colors of photos and images mac os x 73
- Giving priority to particular graphic elements and colors for printing 76
- 1 options suitable for the selected print priority are listed under print quality 77
- 1 options suitable for the selected type of paper are listed under print priority 77
- Choose the print quality the printing mode is determined by a combination of the print quality and resolution 77
- Color settings 77
- Ipf750 77
- Print quality 77
- 1 displayed in mac os x 78
- 1 options suitable for the selected print priority are listed under color mode 2 the order of options displayed varies depending on the operating system 78
- Choosing the document type and printing conditions mac os x 78
- Choosing the document type and printing conditions windows 78
- Enhancing printing quality 78
- For instructions on specifying the print quality and color settings before printing refer to the following topics as ap propriate for your computer and operating system 78
- Ipf750 78
- To print at a higher level of quality in the printer driver choose high or highest in print quality and choose unidirectional printing as the direction of printing 78
- Choosing the document type and printing conditions windows 79
- Choosing the document type and printing conditions mac os x 82
- Printing enlargements or reductions 85
- Resizing originals to match the paper size 85
- Resizing originals to match the paper size windows 85
- Resizing originals to match the paper size mac os x 88
- Resizing originals to fit the roll width 91
- Resizing originals to fit the roll width windows 92
- Resizing originals to fit the roll width mac os x 94
- Resizing originals by entering a scaling value 97
- Resizing originals by entering a scaling value windows 98
- Resizing originals by entering a scaling value mac os x 101
- Printing at full size 105
- Printing on oversized paper 105
- Printing at full size windows 106
- Printing at full size mac os x 108
- Borderless printing at actual size 111
- Borderless printing at actual size windows 113
- Borderless printing at actual size mac os x 115
- Borderless printing 120
- Borderless printing on paper of equivalent size 120
- Borderless printing by resizing originals to match the paper size windows 121
- Borderless printing by resizing originals to match the paper size mac os x 124
- Borderless printing by resizing originals to fit the roll width 127
- Borderless printing by resizing originals to fit the roll width windows 129
- Borderless printing by resizing originals to fit the roll width mac os x 131
- Fit roll paper width 136
- Printing banners or at other non standard sizes 136
- Printing vertical or horizontal banners large format printing 136
- Printing vertical or horizontal banners large format printing windows 137
- Creating the banner in the application 139
- Printing the banner 139
- Printing vertical or horizontal banners large format printing mac os x 142
- Print the banner 144
- Printing on non standard paper sizes 146
- Printing on non standard paper sizes windows 147
- Registering and printing with a custom paper size 147
- Printing by using custom size 149
- Printing on non standard paper sizes mac os x 151
- Printing multiple originals next to each other 155
- Tiling and multiple pages per sheet 155
- Printing multiple originals next to each other windows 156
- Printing multiple originals next to each other mac os x 158
- Printing multiple pages continuously 160
- Printing multiple pages continuously windows 161
- Printing multiple pages continuously mac os x 163
- Printing multiple pages per sheet 165
- Printing multiple pages per sheet windows 166
- Printing multiple pages per sheet mac os x 169
- Printing posters in sections 173
- Printing large posters windows 174
- Centering originals 177
- Printing originals centered on rolls 177
- Printing originals centered on rolls windows 177
- Printing originals centered on rolls mac os x 179
- Printing originals centered on sheets 183
- Printing originals centered on sheets windows 183
- Printing originals centered on sheets mac os x 186
- Conserving roll paper 190
- Conserving roll paper by rotating originals 90 degrees 190
- Conserving roll paper by rotating originals 90 degrees windows 190
- Conserving roll paper by rotating originals 90 degrees mac os x 192
- Conserving roll paper by printing originals without top and bottom margins 196
- Conserving roll paper by printing originals without top and bottom margins windows 196
- Conserving roll paper by printing originals without top and bottom margins mac os x 199
- Checking images before printing 204
- Checking the layout in a preview before printing 204
- Other useful settings 206
- Printing with watermarks 206
- Printing with watermarks copy file copy and so on windows 207
- Making the original orientation match the paper orientation 210
- Making the original orientation match the paper orientation windows 210
- Making the original orientation match the paper orientation mac os x 212
- Cutting roll paper after printing 216
- Cutting roll paper after printing windows 216
- Using favorites 216
- Cutting roll paper after printing mac os x 218
- Windows software 222
- Printer driver 223
- Printer driver settings 223
- Specifying paper in the printer driver 225
- Confirming print settings 228
- Checking the layout in a preview before printing 229
- Registering a favorite 230
- Using favorites 230
- Printing using the favorite 232
- Accessing the printer driver dialog box from applications 233
- Accessing the printer driver dialog box from the operating system menu 234
- Main sheet 236
- Common items 237
- Configuration using easy settings 238
- Configuration using advanced settings 239
- Paper information on printer dialog box 240
- Paper detailed settings dialog box 241
- Color adjustment sheet color 242
- View settings dialog box for the printing application 242
- Object adjustment dialog box color 244
- Driver matching mode 245
- Matching sheet 245
- Icc matching mode driver icm mode and host icm mode 246
- Color adjustment sheet monochrome 247
- Object adjustment dialog box monochrome 248
- Page setup sheet 249
- Paper size options dialog box 251
- Layout sheet 253
- Page options dialog box 254
- Special settings dialog box 255
- Favorites sheet 256
- Utility sheet 258
- Support sheet 259
- Settings summaries dialog box 260
- Device settings sheet 261
- Operating environment 262
- Preview 262
- The features of preview 262
- Starting preview 263
- Preview main window 264
- Dialog area 267
- Enlarge reduce the screen display 268
- Moving a page 268
- Priority setting for rotating 90 degrees 269
- Using the ruler 269
- In layout selection click the layout button to use 271
- Ipf750 271
- Printing with selecting the layout 271
- You can print which conserves paper by selecting the layout 271
- Print on the center 273
- Not print spaces at the top bottom 274
- Free layout 275
- The features of free layout 275
- Operating environment 276
- Starting free layout 276
- Free layout main window 278
- Detailed settings 280
- Preferences dialog box 281
- Page options dialog box 282
- Zoom dialog box 283
- Format dialog box 284
- Size sheet 284
- Position sheet 285
- Laying out a multiple file document on one page 286
- Laying out a document created with multiple application programs on one page 289
- Selecting an object 292
- Changing the object size 293
- Moving an object 293
- Resizing by means of mouse operation 293
- Resizing by specifying a scaling value 293
- Rotating an object 294
- Aligning objects 295
- Laying out objects automatically 295
- Changing the object overlapping order 297
- Pasting a copied or cut object 299
- Folded duplex window 300
- Finished size settings dialog box 301
- Binding settings dialog box 302
- Prints using folded duplex 303
- Color imagerunner enlargement copy 305
- Operating environment 305
- The features of color imagerunner enlargement copy 305
- Starting color imagerunner enlargement copy 306
- To start by selecting printers and faxes from the start button 306
- Color imagerunner enlargement copy dialog box 307
- To start by selecting color imagerunner enlargement copy from the start button 307
- Hot folder 308
- Creating a new hot folder 309
- Specifying an existing shared folder as a hot folder 313
- Setting the print parameters 316
- Printing enlargements of scanned originals from a color imagerunner 317
- Operating environment 319
- Print plug in for office 319
- Print plug in for office features 319
- Steps to install 320
- Steps to uninstall 324
- Enabling print plug in for office for items disabled in office applications 325
- Re installing print plug in for office 325
- When print plug in for office is not displayed 325
- To start from microsoft word 330
- If you want to change the display to another file or application while the printing wizard is open close the printing wizard dialog box otherwise you may not be able to change displays or oper ate the toolbar 331
- Ipf750 331
- Print matching roll width word 332
- Borderless printing word 335
- Multi page printing word 338
- Register the settings word 340
- Print using registered settings word 341
- Create page size in portrait or landscape orientation 344
- Portrait orientation landscape orientation word 344
- Below are the steps to start print plug in for office from microsoft powerpoint 346
- Check that the imageprograf print plug in toolbar ribbon is displayed 346
- Click the buttons on the toolbar ribbon according to the items you want to set 346
- If start imageprograf print plug in is displayed on the toolbar ribbon click it 346
- If the imageprograf print plug in toolbar ribbon is not displayed refer to the following 346
- Ipf750 346
- Start microsoft powerpoint 346
- The layout may collapse if you create a form using existing data if that is the case modify the data again 346
- To start from microsoft powerpoint 346
- Print matching roll width powerpoint 348
- Borderless printing powerpoint 351
- Multi page printing powerpoint 354
- Register the settings powerpoint 356
- Print using registered settings powerpoint 357
- Create page size in portrait or landscape orientation 360
- Portrait orientation landscape orientation powerpoint 360
- To start from microsoft excel 362
- Print entire sheet excel 364
- Print selected area excel 367
- Configuring binding excel 371
- Configuring special settings 372
- Click ok to close the special settings dialog box 373
- Ipf750 373
- Hdi driver 374
- Operating environment 374
- The features of hdi driver 374
- Installation procedure 375
- Installing with the canon installer 375
- Installing with the add a plotter wizard 383
- Opening the plotter configuration dialog box 387
- Opening from the autocad file menu 388
- Opening from the start menu 389
- Device and document settings sheet 391
- Plotter configuration editor dialog box 391
- Media source and media size settings 392
- Graphics settings 393
- Vector graphics settings 393
- Raster graphics settings 394
- Merge control settings 395
- Opening the custom properties dialog box 396
- Custom properties dialog box 398
- Adjust brightness to achieve the best level of brightness in printed line drawings drag slide bar left and right to adjust the level of brightness 399
- Brightness 399
- Color matching 399
- Color matching is available for selection only when color is selected for color mode 399
- Color mode 399
- Ipf750 399
- Print quality 399
- Select a print quality to suit the print job 399
- The availability of settings depends on the print priority and media type selections 399
- The availability of settings is determined by the media type and print priority selections 399
- You can select a color matching to suit the print job 399
- You can select a color mode to suit the print job 399
- Paper detailed settings 400
- Between scans this sets the wait time between line scans during printing 401
- Cut speed 401
- If you make the margin white space too small this could disturb the print image or cause the printhead to scour the surface of some types of media if the printhead scours the surface of the media adjust the height of the printhead 401
- Ipf750 401
- Near end margin this sets the length of the near end margin of the roll paper 401
- Roll paper margin for safety 401
- This selects the auto cut speed 401
- Color compatibility dialog box 402
- Printing 402
- Status monitor 406
- The features of imageprograf status monitor 406
- Job management using imageprograf status monitor 407
- Accounting 409
- Accounting manager 409
- Accounting manager main window 410
- Launching the accounting manager 410
- Accounting manager basic procedures 413
- Job list area 413
- Configuring unit costs in accounting manager 414
- Setting the unit cost for ink 415
- To set different unit costs for each ink color 415
- To set the same unit cost for all the inks 415
- Setting the unit cost for paper 416
- Setting the unit cost for items other than ink and paper 417
- Configuring units and display settings in accounting manager 418
- Automatically acquiring print job logs at regular intervals 419
- Canceling regular print job log acquisition 419
- Exporting print job data as a csv file 420
- Switching between displaying jobs on printer and regularly acquired jobs 420
- Showing job properties 421
- Showing saving and loading selected unit cost data 421
- Showing the total amount of ink and paper consumed 421
- Digital photo front access 422
- Device setup utility 423
- Imageprograf device setup utility 423
- Installing imageprograf device setup utility 423
- Configuring the ip address using imageprograf device setup utility 424
- When specifying an ipv4 ip address 424
- When specifying an ipv6 ip address 426
- Drivers applicable with media configuration tool 428
- Media configuration tool 428
- Operating environment 428
- The features of media configuration tool 428
- Installation procedures 429
- Starting the media configuration tool 432
- Media configuration tool main window 433
- Adding media types 434
- Editing media type information 434
- Changing media names 437
- Deleting media types you have added 439
- Switching media types display show hide 441
- Changing the display order of media types 442
- Updating media types 444
- Mac os x software 447
- Printer driver 448
- Printer driver settings 448
- Specifying paper in the printer driver 450
- Confirming print settings 452
- Checking the layout in a preview before printing 453
- Accessing the printer driver dialog box from applications 455
- Using favorites 455
- Common items 456
- Main pane 456
- Configuration using easy settings 457
- Configuration using advanced settings 458
- Paper information on printer dialog box 459
- Paper detailed settings dialog box 460
- View settings dialog box for the printing application 461
- Driver matching mode 462
- Matching pane 462
- Icc matching mode 463
- Color settings pane color 464
- Object adjustment dialog box color 465
- Color settings pane monochrome 466
- Object adjustment dialog box monochrome 467
- Page setup pane 468
- Utility pane 470
- Additional settings pane 471
- Support pane 471
- Operating environment 473
- Preview 473
- The features of preview 473
- Starting preview 474
- Preview main window 475
- Paper settings panel 478
- Easy settings 480
- Ipf750 480
- Print target 480
- You can easily select the best settings for the print job by just selecting an item from the print target list that matches the content of the document 480
- You can easily select the best settings for the print job simply if you select each print target item the corresponding comment for that item is displayed below the list 480
- Advanced settings 482
- Ipf750 482
- Presents detailed settings for the print quality the color mode and other items so you can select the values for these settings yourself 482
- Print priority 482
- Print quality 482
- Select a print quality mode that is appropriate for the print job 482
- Selecting print quality strikes a balance between the quality of the printed image and printing speed 482
- The number of settings available for selection depends on the media type 482
- Output settings panel 483
- Color settings panel 485
- Adjusting color 486
- Color adjustment 486
- Drag each slider to the left or right to adjust 487
- Ipf750 487
- Select color adjustment 487
- You can also click the up or down arrow or enter the number directly to increase or decrease the value 487
- Adjusting monochrome 488
- Matching 489
- Click matching method list and then select a setting 491
- Driver matching mode 491
- Ipf750 491
- Under matching mode select driver matching mode 491
- Click the input profile list and select an input profile 492
- Click the matching method list and then select a setting 492
- Icc matching mode 492
- Ipf750 492
- Under matching mode select icc matching mode 492
- Colorsync 493
- Preferences dialog box 493
- Go to page dialog box 494
- Zoom dialog box 494
- Print on the center 495
- Print with no borders 495
- Not print spaces at the top bottom 496
- Print page rotated 90 degrees 497
- Display with fitting to the width of the paper 498
- Display with all 499
- Display with actual size 500
- Moving a page 500
- Free layout 502
- Operating environment 502
- The features of free layout 502
- Starting free layout 503
- Free layout main window 504
- Paper settings panel 507
- Easy settings 509
- Ipf750 509
- Print target 509
- You can easily select the best settings for the print job by just selecting an item from the print target list that matches the content of the document 509
- You can easily select the best settings for the print job simply if you select each print target item the corresponding comment for that item is displayed below the list 509
- Advanced settings 511
- Ipf750 511
- Presents detailed settings for the print priority the print quality and other items so you can select the values for these set tings yourself 511
- Print priority 511
- Print quality 511
- Select a print quality mode that is appropriate for the print job 511
- Selecting print quality strikes a balance between the quality of the printed image and printing speed 511
- The level of the print quality and resolution settings are displayed in the following combinations the level of the print quality and resolution settings are displayed in the following combinations 511
- The number of settings available for selection depends on the media type 511
- Color settings panel 512
- Adjusting color 513
- Color adjustment 513
- Drag each slider to the left or right to adjust 514
- Ipf750 514
- Select color adjustment 514
- You can also click the up or down arrow or enter the number directly to increase or decrease the value 514
- Adjusting monochrome 515
- Matching 516
- Click matching method list and then select a setting 518
- Driver matching mode 518
- Ipf750 518
- Under matching mode select driver matching mode 518
- Click the input profile list and select an input profile 519
- Click the matching method list and then select a setting 519
- Icc matching mode 519
- Ipf750 519
- Under matching mode select icc matching mode 519
- Colorsync 520
- Preferences dialog box 521
- Page setup dialog box 522
- Zoom dialog box 523
- Format dialog box 524
- Laying out a document created with multiple application programs on one page 525
- Laying out a multiple file document on one page 525
- Changing the object size 526
- Resizing by means of mouse operation 526
- Selecting an object 526
- Moving an object 527
- Resizing by specifying a scaling value 527
- Rotating an object 528
- Aligning objects 529
- Laying out objects automatically 529
- Changing the object overlapping order 531
- Pasting a copied or cut object 533
- Color imagerunner enlargement copy 534
- Operating environment 534
- The features of color imagerunner enlargement copy 534
- Starting color imagerunner enlargement copy 535
- Color imagerunner enlargement copy dialog box 536
- Hot folder 537
- Creating a new hot folder 538
- Editing a hot folder setting print conditions 541
- Deleting a hot folder 544
- Setting the print parameters 544
- Paper settings panel 545
- Easy settings 547
- Ipf750 547
- Print target 547
- The number of settings available for selection depends on the media type 547
- You can easily select the best settings for the print job by just selecting an item from the print target list that matches the content of the document 547
- You can easily select the best settings for the print job simply if you select each print target item the corresponding comment for that item is displayed below the list 547
- Advanced settings 548
- Ipf750 549
- Print quality 549
- Printing time is longer and more ink is consumed with high than with draft however print quality is higher 549
- Printing time is shorter and less ink is consumed with draft than with high however print quality is lower 549
- Selecting print quality strikes a balance between the quality of the printed image and printing speed 549
- The availability of settings is determined by the media type and print priority selections 549
- The level of the print quality and resolution settings are displayed in the following combinations the level of the print quality and resolution settings are displayed in the following combinations 549
- The number of settings available for selection depends on the media type 549
- Borderless printing 550
- Enlarged reduced printing 550
- Ipf750 550
- Output settings panel 550
- Select the method for enlarged reduced printing the following settings are available for enlarged reduced printing 550
- You can print the media without margins on all sides when the roll paper with the specific width and the specific media type is used 550
- Color mode 552
- Color settings panel 552
- Ipf750 552
- Matching mode 552
- The availability of settings depends on the print priority and media type selections 552
- Under matching mode select the matching mode 552
- You can select a color mode to suit the print job 552
- Click matching method list and then select a setting 553
- Driver matching mode 553
- Ipf750 553
- Under matching mode select driver matching mode 553
- Click matching method list and then select a setting 554
- Icc matching mode 554
- Ipf750 554
- Under matching mode select icc matching mode 554
- Colorsync 555
- Printing enlargements of scanned originals from a color imagerunner 555
- Printmonitor 557
- The features of imageprograf printmonitor 557
- Job management using imageprograf printmonitor 558
- Drivers applicable with media configuration tool 559
- Media configuration tool 559
- Operating environment 559
- The features of media configuration tool 559
- Procedures for installing 560
- Procedures for uninstalling 563
- Starting the media configuration tool 567
- Media configuration tool main window 568
- Adding media types 569
- Editing media type information 569
- Changing media names 572
- Deleting media types you have added 574
- Switching media types display show hide 576
- Changing the display order of media types 578
- Updating media types 580
- Handling paper 583
- Types of paper 584
- 1 for information on types of paper compatible with borderless printing refer to the paper reference guide 585
- Ipf750 585
- Outer diameter up to 150 mm 6 in inner diameter of paper core 2 or 3 inches printing side out 585
- Paper sizes 585
- Rolls that meet the following conditions are supported 585
- Sheets 585
- Sheets of the following sizes are supported 585
- Ipf750 586
- Displaying the paper reference guide 587
- Updating paper information 589
- Adding custom paper 590
- Attaching the roll holder to rolls 591
- Handling rolls 591
- Insert the respective attachments for the roll paper core on the roll holder and holder stopper 593
- Ipf750 593
- Using rolls with a 2 inch paper core 593
- Using rolls with a 3 inch paper core 593
- Loading rolls in the printer 595
- Be careful not to soil the printing surface of roll paper as you insert it in the slot this may affect the printing quality we recommend wearing clean cloth gloves when handling rolls to protect the print ing surface 598
- For details on types of paper to select see the paper reference guide 598
- Holding it at the positions indicated close the roll cover 598
- If the paper is wrinkled or warped straighten it out before loading it 598
- Ipf750 598
- Load paper straight so it is not fed askew 598
- Once paper feeding starts you will need to do the following based on the manageremainroll setting and the barcode printed on rolls 598
- Changing the type of paper 599
- Using the same type of paper regularly 600
- Removing the roll from the printer 601
- Specifying the paper length 601
- Removing the roll holder from rolls 605
- Feeding roll paper manually 606
- Keeping track of the amount of roll paper left 607
- Specifying the ink drying time for rolls 608
- Windows 608
- Mac os x 609
- Between pages and 610
- Between scans in 610
- Drying time and then click ok 610
- How rolls are cut after ejection varies depending on printer settings 610
- In the paper detailed settings dialog box displayed next select the desired settings values in 610
- Ipf750 610
- Specifying the cutting method for rolls 610
- Eject waiting for ink to dry after printing 611
- Manual when using media that cannot be cut with the cutter unit 612
- Paper cutting to have the roll cut at your specified position 614
- Cutting the leading edge of roll paper automatically 615
- Reducing dust from cutting rolls 617
- Handling sheets 618
- Loading sheets in the printer 618
- Ipf750 619
- Slide the width guide a to align it with the mark for the size of paper you will load 619
- Load paper in the desired position to start printing from 622
- Printing from a desired starting point 622
- Set width detection to off 622
- Removing sheets 625
- Ipf750 626
- Pull the release lever forward 626
- Output stacker 627
- Using the output stacker 627
- Note regarding the extended position 628
- Adjustments for better print quality 634
- Adjusting the printhead 635
- Automatic adjustment to straighten lines and colors head posi adj 635
- Manual adjustment to straighten lines and colors head posi adj 637
- Adjusting line misalignment head inc adj 639
- Troubleshooting paper abrasion and blurry images head height 642
- Adjusting the feed amount 644
- Selecting a feed amount adjustment method feed priority 644
- Automatic banding adjustment adj quality 646
- Manual banding adjustment adj quality 647
- Fine tuning the paper feed amount adj fine feed 649
- Adjusting line length adjust length 650
- Adjusting the vacuum strength vacuumstrngth 652
- Printer parts 654
- Printer parts 655
- Top cover inside 658
- Roll cover inside 659
- Carriage 660
- Ink tank cover inside 660
- Optional accessories 663
- Roll holder set 663
- Control panel 664
- Control panel 665
- Operations and display screen 665
- Control panel display 667
- Types of tabs 667
- Bottom line displayed 668
- Ipf750 668
- Middle line displayed 668
- Printer status and modes 668
- Printer status is classified according to the following five modes 668
- Top line displayed 668
- Ipf750 669
- Mode display 669
- Mode transition 669
- How to view instructions with navigate 671
- Checking instructions during printer operations 672
- How to view instructions 672
- Example ink tank replacement 673
- Ipf750 673
- When all actions in the sequence are finished the instruction screen for the next step is displayed 673
- Menu operations during printing 675
- Menu operations when no print job is in progress 675
- Printer menu 675
- Printer menu operations 675
- Accessing menus 676
- Menu operations 676
- Specifying menu items 678
- Specifying numerical values 678
- Executing menu commands 679
- Menu structure 679
- Paper menu 679
- Ipf750 680
- 1 for information on the types of paper the printer supports refer to the paper reference guide see 681
- 2 for information on the sizes of paper the printer supports 681
- 3 available only if manageremainroll is on 4 available only if width detection is off 5 leading edge is not available as a setting option in the paper detailed settings dialog box of the printer driv er 6 681
- Ink menu 681
- Ipf750 681
- Job menu 681
- Types of paper in the printer driver and related software as well as on the control panel are updated when you install the printer driver from the user software cd rom or if you update paper information with the media configuration tool 681
- Ipf750 682
- Set adj menu 682
- Ipf750 683
- Ipf750 684
- Ipf750 685
- Ipf750 686
- Ipf750 687
- Ipf750 688
- Menu settings 689
- Ipf750 690
- Paper menu 690
- 1 for information on the types of paper the printer supports refer to the paper reference guide 691
- Ipf750 691
- Media configuration too 691
- See types of paper 691
- The types of paper indicated in the printer driver and related software as well as on the con trol panel are updated when you install the printer driver from the user software cd rom or if you update paper information by using the media configuration tool see 691
- 1 indicates a rough estimate of how much ink was consumed per page actual ink consumption may be different the average margin of error for estimates calculated according to canon measurement conditions for ink costs is 15 canon does not guarantee the accuracy of these estimates estimates may vary depending on conditions of use calculation of these estimates does not include ink consumed when cleaning printheads by forceful ejection of ink 692
- Ink menu 692
- Ipf750 692
- Job menu 692
- Set adj menu 692
- Ipf750 693
- Ipf750 694
- If you choose circle setting 695
- If you choose no setting 695
- Ipf750 695
- If you choose smooth 696
- If you choose software 696
- Ipf750 696
- Ipf750 697
- Ipf750 698
- Ipf750 699
- 1 indicates a rough estimate of how much ink was consumed per page actual ink consumption may be different the average margin of error for estimates calculated according to canon measurement conditions for ink costs is 15 canon does not guarantee the accuracy of these estimates estimates may vary depending on conditions of use calculation of these estimates does not include ink consumed when cleaning printheads by forceful ejection of ink 2 it is not possible to match the colors and image quality produced by the specified printer exactly 700
- For details on menu levels and values 700
- Ink menu 700
- Ipf750 700
- Menu items are described in the following tables for instructions on selecting menu items 700
- Menu settings during printing 700
- Viewing and configuration by administrators and only viewing by other users 700
- Viewing and configuration by administrators only 700
- 1 a rough estimate of how much ink was consumed per job is displayed actual ink consumption may be different the average margin of error for estimates calculated according to canon measurement conditions for ink costs is 15 canon does not guarantee the accuracy of these estimates estimates may vary depending on conditions of use calculation of these estimates does not include ink consumed when cleaning printheads by forceful ejection of ink 701
- Ipf750 701
- Job menu 701
- Set adj menu 701
- Checking the information in status print reports 702
- Printing status print reports 702
- Status print 702
- Ipf750 703
- Printing interface print reports 704
- Printing interface setting reports 704
- Confirming interface print information 705
- Ipf750 706
- Ipf750 707
- Network setting 708
- Network environment 709
- System requirements 709
- Network environment 710
- Using remoteui 712
- Configuring the network with remoteui 713
- Configuring the ip address on the printer 715
- Initial settings 715
- Configuring the ip address using the printer control panel 716
- Configuring the ip address using arp and ping commands 717
- Configuring tcp ipv6 network settings 718
- Configuring the printer driver destination windows 719
- Configuring the printer driver destination mac os x 720
- Configuring the printer s tcp ip network settings with remoteui 720
- When using an ipv4 ip address 720
- Click edit in the upper right corner of the tcp ipv4 group to display the edit tcp ip protocol settings page 721
- Click network in the device manager menu at left to display the network page 721
- If a password has been set on the printer enter the password 721
- Ipf750 721
- Refer to the tcp ip settings items table to complete the settings 721
- Tcp ip settings items 721
- When using an ipv6 ip address 722
- Click ok to display the network page 723
- If you are using a dns server select enable dns dynamic update and enter the ip address for dns serv ers and dns domain name in primary dns server address secondary dns server address and dns domain name respectively 723
- Ipf750 723
- Configuring netware network settings 724
- Netware settings 724
- Specifying the frame type using imageprograf device setup utility 725
- Specifying the printer s frame type 725
- Specifying the frame type using the printer control panel 728
- Choosing the type of print services 729
- Specifying netware print services 729
- Click edit in the upper right corner of the netware group to display the edit netware protocol settings page 732
- Click network in the device manager menu at left to display the network page 732
- Configuring the printer s netware network settings with remoteui 732
- Follow the steps below to configure netware protocol settings other than the frame type by using remoteui 732
- For details on remoteui 732
- If a password has been set on the printer enter the password 732
- Ipf750 732
- Netware settings items 732
- Refer to the netware settings items table to complete the settings 732
- Select administrator mode and click logon 732
- Start the web browser and enter the following url in the location or address box to display the remoteui page http printer ip address or name example http xxx xxx xxx xxx 732
- Configuring the destination in tcp ip networks 735
- Mac os x settings 735
- Configuring the destination for bonjour network 737
- Activating appletalk on the printer 739
- Configuring the destination for appletalk networks 739
- Configuring the destination mac os x 740
- Configuring the printer s appletalk network settings 741
- Other settings 742
- Specifying printer related information 742
- Configuring the communication mode manually 743
- Email notification when printing is finished or errors occur 744
- Initializing the network settings 745
- Maintenance and consumables 746
- Compatible ink tanks 747
- Ink tanks 747
- Precautions when handling ink tanks 747
- Replacing ink tanks 747
- Access the menu for ink tank replacement 748
- Make sure the printer is ready for ink tank replacement 748
- Remove the ink tank 749
- Install the ink tanks 750
- Checking ink tank levels 752
- If a message for checking the ink is shown on the display screen 753
- When to replace ink tanks 753
- Before print jobs and maintenance that consume a lot of ink 754
- If a message for ink replacement is shown on the display screen 754
- Checking for nozzle clogging 755
- Printhead 755
- Printheads 755
- Cleaning the printhead 756
- Replacing the printhead 757
- When to replace the printhead 757
- Access the menu for printhead replacement 758
- Compatible printheads 758
- Precautions when handling the printhead 758
- Replace the printhead 759
- Compatible maintenance cartridges 765
- Maintenance cartridge 765
- Precautions when handling the maintenance cartridge 765
- Replacing the maintenance cartridge 765
- Access the menu for maintenance cartridge replacement 766
- Make sure the printer is ready for maintenance cartridge replacement 766
- Replace the maintenance cartridge 767
- Checking the remaining maintenance cartridge capacity 770
- If a message for checking the maintenance cartridge is shown on the display screen 771
- If a message for the maintenance cartridge replacement is shown on the display screen 771
- When much of the maintenance cartridge capacity is depleted 771
- When to replace the maintenance cartridge 771
- Cleaning inside the top cover 772
- Cleaning the printer 772
- Cleaning the printer exterior 772
- Close the top cover 777
- Ipf750 777
- Other maintenance 778
- Preparing to transfer the printer 778
- Remove the ink tank 779
- Pack the printer 781
- Confirming the firmware version 782
- Updating the firmware 782
- Consumables 783
- Troubleshooting 784
- Frequently asked questions 785
- Frequently asked questions 769 785
- Ipf750 785
- This section presents frequently asked questions and answers to view more detailed explanations click the hyperlinks in the answer column 785
- Ipf750 786
- Clearing jammed paper paper feed slot 787
- Problems regarding paper 787
- Clearing jammed roll paper 789
- Clearing a jammed sheet 793
- After removing the paper make sure there are no other scraps of paper in the printer 796
- Cannot load sheets 796
- Ipf750 796
- Pull the release lever forward 796
- Roll paper cannot be inserted into the paper feed slot 796
- Depression on the leading edge is left 797
- Ipf750 797
- Paper is not cut 797
- Paper is not cut neatly 797
- The size of clear film cannot be detected 797
- Ipf750 798
- Roll paper is continuously ejected 798
- Ink filling is displayed 799
- Ink filling is displayed ink filling is displayed 783 the display screen indicates agitating 784 799
- Ipf750 799
- Printing does not start 799
- The data lamp on the control panel does not light up 799
- The data lamp on the control panel does not light up 783 the printer does not respond even if print jobs are sent 783 799
- The printer does not respond even if print jobs are sent 799
- Ipf750 800
- The display screen indicates agitating 800
- An error message is shown on the display screen 801
- An error message is shown on the display screen 785 the printer ejects blank unprinted paper 785 801
- Ipf750 801
- The printer ejects blank unprinted paper 801
- The printer stops during a print job 801
- Ipf750 802
- Line thickness is not uniform line thickness is not uniform 793 lines are misaligned 793 802
- Printed colors are inaccurate printed colors are inaccurate 789 banding in different colors occurs 790 colors in printed images are uneven 790 image edges are blurred or white banding occurs 791 the contrast becomes uneven during printing 792 802
- Printing is faint 802
- Printing is faint 786 paper rubs against the printhead 787 the edges of the paper are dirty 788 the surface of the paper is dirty 788 the back side of the paper is dirty 789 802
- Problems with the printing quality 802
- Problems with the printing quality caused by the type of paper problems with the printing quality caused by the type of paper 794 802
- The length of printed images is inaccurate in the feeding direction the length of printed images is inaccurate in the feeding direction 792 images are printed crooked 792 documents are printed in monochrome 793 802
- Ipf750 803
- Paper rubs against the printhead 803
- Ipf750 804
- The edges of the paper are dirty 804
- The surface of the paper is dirty 804
- Ipf750 805
- Printed colors are inaccurate 805
- The back side of the paper is dirty 805
- Banding in different colors occurs 806
- Colors in printed images are uneven 806
- Ipf750 806
- Image edges are blurred or white banding occurs 807
- Ipf750 807
- Images are printed crooked 808
- Ipf750 808
- The contrast becomes uneven during printing 808
- The length of printed images is inaccurate in the feeding direction 808
- Documents are printed in monochrome 809
- Ipf750 809
- Line thickness is not uniform 809
- Lines are misaligned 809
- For paper specific troubleshooting tips to improve the printing quality refer to the paper reference guide 810
- Ipf750 810
- Problems with the printing quality caused by the type of paper 810
- See types of paper 810
- Cannot connect the printer to the network 811
- Cannot connect the printer to the network 795 811
- Cannot print over a network 811
- Cannot print over a tcp ip network 811
- Cannot print over a tcp ip network cannot print over a tcp ip network 795 cannot print over a netware network 796 cannot print over appletalk or bonjour networks 796 811
- Ipf750 811
- Cannot print over a netware network 812
- Cannot print over appletalk or bonjour networks 812
- Ipf750 812
- Installation problems 813
- Removing installed printer drivers 813
- Removing imageprograf device setup utility windows 814
- Hp gl 2 printing takes a long time hp gl 2 printing takes a long time 800 replotting with hp gl 2 jobs is not possible 801 the printer stops when printing a hp gl 2 job the carriage stops moving 801 815
- Hp gl 2 problems 815
- Ipf750 815
- Lines are printed too thick or thin in hp gl 2 print jobs 815
- Lines or images are missing in printed hp gl 2 jobs 815
- With hp gl 2 printing is misaligned 815
- With hp gl 2 printing is misaligned 799 lines or images are missing in printed hp gl 2 jobs 799 lines are printed too thick or thin in hp gl 2 print jobs 799 hp gl 2 jobs are printed in monochrome or color 800 printed colors of lines are inaccurate during hp gl 2 printing 800 hp gl 2 jobs are printed 6 mm larger than specified 800 hp gl 2 jobs are printed at maximum size even if a standard size is specified 800 815
- Hp gl 2 jobs are printed 6 mm larger than specified 816
- Hp gl 2 jobs are printed at maximum size even if a standard size is specified 816
- Hp gl 2 jobs are printed in monochrome or color 816
- Hp gl 2 printing takes a long time 816
- Ipf750 816
- Printed colors of lines are inaccurate during hp gl 2 printing 816
- Ipf750 817
- Replotting with hp gl 2 jobs is not possible 817
- The printer stops when printing a hp gl 2 job the carriage stops moving 817
- Other problems 818
- The printer does not go on 818
- If the printer makes a strange sound 819
- Ipf750 819
- Messages advising to check the maintenance cartridge are not cleared 819
- The printer consumes a lot of ink 819
- Ink level detection 820
- Releasing ink level detection 820
- Error message 824
- Error messages 825
- Borderless printng not possible borderless printng not possible 820 paper position not suitable for borderless printing 821 827
- Ipf750 827
- Mediatype mismatch 827
- Mediatype mismatch 811 the paper is too small 812 the paper is too small 812 paprwidth mismatch 813 paper size not detected 814 insufficient paper for job 815 this paper cannot be used 815 827
- Messages regarding paper 827
- Paper jam paper jam 817 paper is crooked 818 paper not aligned with right guide 819 cannot detect papr 819 paper cutting failed 819 end of paper feed 820 rel lever is in wrong position 820 827
- Roll paper is not securely in contact with roll holder roll paper is not securely in contact with roll holder 821 827
- Roll printing is selected roll printing is selected 815 roll printing is selected but sheets are loaded 816 the roll is empty 816 827
- Sheet printing is selected sheet printing is selected 817 regular printing is selected but a roll is loaded 817 827
- Ipf750 828
- Replace paper with a4 ltr vertical or larger 828
- The paper is too small 828
- Ipf750 829
- Paprwidth mismatch 829
- Remove paper and check pap size 829
- Replace roll with 10 in wide or larger roll 829
- Ipf750 830
- Paper size not detected 830
- Insufficient paper for job 831
- Ipf750 831
- Roll printing is selected 831
- This paper cannot be used 831
- Ipf750 832
- Roll printing is selected but sheets are loaded 832
- The roll is empty 832
- Ipf750 833
- Paper jam 833
- Push the release lever back 833
- Regular printing is selected but a roll is loaded 833
- Sheet printing is selected 833
- Ipf750 834
- Manually rewind the roll all the way and press ok 834
- Paper is crooked 834
- To disable this message if it is displayed repeatedly despite reloading paper for example choose off or loose in the skew check lv setting of the printer menu however this may cause jams and printing prob lems because paper may be askew when printed also the platen may become soiled which may soil the back of the next document when it is printed 834
- Cannot detect papr 835
- Ipf750 835
- Paper cutting failed 835
- Paper not aligned with right guide 835
- Borderless printng not possible 836
- End of paper feed 836
- Ipf750 836
- Rel lever is in wrong position 836
- Ipf750 837
- Paper position not suitable for borderless printing 837
- Roll paper is not securely in contact with roll holder 837
- Close ink tank cover close ink tank cover 823 ink tank is empty 823 not much ink is left 823 no ink tank loaded 824 wrong ink tank 824 do not pull out ink tank 824 838
- Ink insufficient 838
- Ink insufficient 822 no ink left 822 remaining level of the ink cannot be correctly detected 822 unable to detect ink level correctly 822 838
- Ipf750 838
- Messages regarding ink 838
- No ink left 838
- Remaining level of the ink cannot be correctly detected 838
- Unable to detect ink level correctly 838
- Close ink tank cover 839
- Ink tank is empty 839
- Ipf750 839
- Not much ink is left 839
- Do not pull out ink tank 840
- Ipf750 840
- No ink tank loaded 840
- Wrong ink tank 840
- Cannot adjust paper feed 841
- Cannot adjust paper feed 825 check printed document 825 841
- Check printed document 841
- Ipf750 841
- Messages regarding printing or adjustment 841
- Cannot adjust printhead 842
- Cannot adjust printhead 826 842
- Ipf750 842
- Messages regarding printheads 842
- Printhead error 842
- Wrong printhead 842
- Wrong printhead wrong printhead 826 printhead error 826 no printhead 827 execute printhead cleaning 827 842
- Execute printhead cleaning 843
- Ipf750 843
- No printhead 843
- Insert the maintenance cartridge 844
- Insert the maintenance cartridge 828 wrong maintenance cartridge 828 844
- Ipf750 844
- Maint cart the level is low 844
- Maint cart the level is low maint cart the level is low 828 no maintenance cartridge capacity 828 maintenance cartridge full 828 maintenance cartridge problem 829 844
- Maintenance cartridge full 844
- Messages regarding the maintenance cartridge 844
- No maintenance cartridge capacity 844
- Wrong maintenance cartridge 844
- Ipf750 845
- Maintenance cartridge problem 845
- Gl2 w0502 the parameter is out of range 846
- Gl2 w0504 this command is not supported 846
- Gl2 wxxxx the memory is full xxxx is 0501 0903 or 0904 846
- Gl2 wxxxx the memory is full xxxx is 0501 0903 or 0904 gl2 wxxxx the memory is full xxxx is 0501 0903 or 0904 830 gl2 w0502 the parameter is out of range 830 gl2 w0504 this command is not supported 830 846
- Ipf750 846
- Messages regarding hp gl 2 846
- This type of paper is not compatible with hp gl 2 846
- This type of paper is not compatible with hp gl 2 830 846
- Error exxx xxxx x represents a letter or number 847
- Garo wxxxx x represents a number 847
- Hardware error xxxxxxxx xxxx x represents a letter or number 847
- Other messages 847
- Ipf750 848
- Parts replacement time has passed 848
- Prepare for parts replacement 848
- Top cover is open 848
- Unknown file 848
- Error in cutter position 849
- Ipf750 849
- Multi sensor error 849
- Specifications 850
- Printer 851
- Printer specifications 851
- Printing performance 851
- Specifications 851
- 1 prints with a minimum 1 2400 inch dot pitch between ink droplets 852
- 1 the provided starter ink tanks contain 90 ml 3 fl oz each 852
- For information on the types of paper the printer supports refer to the paper reference guide see 852
- Interface 852
- Ipf750 852
- 1 printing may not be possible in some cases depending on the type and size of paper 2 varies depending on the operating system or application 853
- A margin required by the printer is added with respect to the size of paper loaded in the printer except in borderless print ing the actual printing area corresponds to the paper size minus the space for this margin 853
- Ipf750 853
- Options 853
- Print area 853
- Printable area the area that can be printed there is no margin that is a margin of 0 mm during borderless printing on rolls recommended print area we recommend printing within this area 853
- To print so that your original matches the print area exactly use an oversized paper size that includes the required margin 853
- A margin of 20 mm 0 9 in on top 23 mm 0 1 in on bottom and 5 mm 0 0 in on left and right sides is required 854
- A margin of 20 mm 0 9 in on top 5 mm 0 0 in on bottom and 5 mm 0 0 in on left and right sides is required 854
- A margin of 3 mm 0 2 in on all sides is required during borderless printing the margin on all sides is 0 mm for information on paper compatible with borderless printing see the paper reference guide 854
- A margin of 3 mm 0 2 in on top 23 mm 0 1 in on bottom and 3 mm 0 2 in on left and right sides is required 854
- Ipf750 854
- Printable area 854
- Recommended print area 854
- Sheets 854
- Appendix 855
- About this user manual 856
- About this user manual 840 searching topics 841 html version of the manual for printing 843 856
- Button names and user interface elements 856
- Cross reference 856
- Figures and software screens 856
- Figures in this user manual may be different from the actual appearance of the printer in some cases 856
- How to use this manual 856
- Ipf750 856
- Key and button names on the control panel and user interface elements in software such as menus and buttons are indicated as follows in this user manual 856
- Names of printer parts are indicated as follows in this user manual 856
- Other pages or manuals that provide related information are indicated as follows in this user manual 856
- Part names 856
- Screens depicted in this user manual for the printer driver or other software may be different from the actual screens because of subsequent updates 856
- Symbols 856
- The following symbols are used in this user manual to indicate safety information and explanations on restrictions or precautions in use 856
- Windows xp screens are used in explanations of windows operations in this user manual 856
- Searching topics 857
- Html version of the manual for printing 859
- Printing a group of topics in the manual 859
- Printing a group of individual topics in the manual 861
- Printing selected topics 863
- Disposal of the product 866
- Ipf750 867
- Weee directive 867
- Ipf750 868
- Ipf750 869
- Ipf750 870
- Ipf750 871
- Ipf750 872
- Ipf750 873
- Ipf750 874
- Ipf750 875
- I n d e x 876
Похожие устройства
- Canon imagePROGRAF iPF610 Инструкция по эксплуатации
- Canon imagePROGRAF iPF5100 Инструкция по эксплуатации
- Canon imageRUNNER 2520 Инструкция по эксплуатации
- Canon FC-108 Инструкция по эксплуатации
- Canyon cnp-wf518n1 Инструкция по эксплуатации
- Canyon cne-cwc3 Инструкция по эксплуатации
- Canyon cne-cwc2 Инструкция по эксплуатации
- Canyon cne-cwc1 Инструкция по эксплуатации
- Carku e-power elite Инструкция по эксплуатации
- Carku e-power 2 Инструкция по эксплуатации
- Carku e-power-21 Инструкция по эксплуатации
- Carku elite+ Инструкция по эксплуатации
- Carku e-power-20 Инструкция по эксплуатации
- Carku e-power-3 Инструкция по эксплуатации
- Casio wk-240 Инструкция по эксплуатации
- Casio LK-280 Инструкция по эксплуатации
- Legrand Niky 600 Инструкция по эксплуатации
- Casio SA-46 Инструкция по эксплуатации
- Legrand Niky 800 Инструкция по эксплуатации
- Legrand Niky 1000 Инструкция по эксплуатации
Скачать
Случайные обсуждения
Ответы 0
Здравствуйте. Напишите пожалуйста подробно о вреде здоровью потере IPF750 canon
3 года назад