D-Link dgs-1008d/i2 [13/32] Section 2

D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch

SECTION 2

Installation

Package Contents

Before You Connect to the Network

Installing the Switch

Power On

Package Contents

Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the

following items:

• 1. One DGS-1008D 8-Port 1000BASE-T Gigabit Ethernet Switch

• 2. Four rubber feet with adhesive backing

• 3. One external power adapter

• 4. This manual

• 5. Wall-mounting Kit

If any item is found missing or damaged, please contact your local D-Link Reseller for replacement.

Before You Connect to the Network

The site where you install the Switch may greatly affect its performance. Please follow these guidelines for

setting up the Switch.

• Install the Switch on a sturdy, level surface that can support at least 3 kg of weight. Do not place heavy

objects on the Switch.

• The power outlet should be within 1.82 meters (6 feet) of the Switch.

• Visually inspect the power cord and see that it is fully secured to the AC power port.

• Make sure that there is proper heat dissipation from and adequate ventilation around the switch. Leave

at least 10 cm of space at the front and rear of the Switch for ventilation.

• Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating

ranges.

• Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration,

dust, and direct exposure to sunlight.

• When installing the switch on a level surface, attach the rubber feet to the bottom of the device. The

rubber feet cushion the Switch, protect the casing from scratches and prevent it from scratching other

surfaces.