D-Link dgs-1008d/i2 [15/32] Power on power on

D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch

Provide for Adequate Ventilation

Power On

Plug one end of the AC to DC power converter into the power connector of the Switch and the other end into the

local power source outlet.

After the Switch is powered on, the LED indicators will momentarily blink. This blinking of the LED indicators

represents a reset of the system.

Power Failure

As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch

back in.

CAUTION:

Do not place any device on top of Switch, or place the Switch on top

of any device or object that will block the free flow of air through the ventilation

slots on the sides, top, and bottom of the Switch’s case. In addition, care should

be taken not to locate the Switch next to, on top of, or underneath any device that

generates a significant amount of heat. For the Switch to perform at its optimal

level, the Switch must have adequate ventilation to prevent the Switch from

overheating and becoming damaged.