![Gigabyte ga-n3050n-d2p [6/28] 2 productspecifications](/img/pdf.png)
Gigabyte ga-n3050n-d2p [6/28] 2 productspecifications
![Gigabyte ga-n3050n-d2p [6/28] 2 productspecifications](/views2/1167918/page6/bg6.png)
- 6 -
1-2 ProductSpecications
CPU Built in with an Intel
®
Dual-Core Celeron
®
N3050 SoC (1.6 GHz)
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
to these components.
2 MB Cache
Memory 2 x DDR3 DIMM sockets supporting up to 8 GB of system memory
* If only one memory is to be installed, be sure to install it in the DDR3_1 slot.
Dual channel memory architecture
Support for DDR3/DDR3L 1600/1333 MHz memory modules
* Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded
to 1066 MHz.
Support for non-ECC memory modules
Onboard
Graphics
Integrated in the SoC:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
- 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
* Support for HDMI 1.4 version.
Maximum shared memory of 512 MB
Audio Realtek
®
ALC887 codec
High Denition Audio
2/4/5.1/7.1-channel
* To congure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
LAN Realtek
®
GbE LAN chip (10/100/1000 Mbit)
Expansion Slots 1 x PCI slot
Storage Interface Chipset:
- 2 x SATA 6Gb/s connectors
USB Integrated in the SoC:
- 4 x USB 3.0/2.0 ports on the back panel
SoC+GENESYS LOGIC USB 2.0 Hub:
- 4 x USB 2.0/1.1 ports (available through the internal USB headers)
Internal
Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
2 x SATA 6Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
2 x USB 2.0/1.1 headers
1 x serial port header
1 x speaker header
1 x Clear CMOS jumper
1 x chassis intrusion header
Содержание
- Ga n3050n d2p 1
- Rev 1001 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 5 3
- Chapter 3 appendix 5 3
- Ga n3050n d2p motherboard layout 3
- Table of contents 3
- Box contents 4
- Ga n3050n d2p 4
- Ga n3050n d2p motherboard 4
- Ga n3050n d2p motherboard layout 4
- Motherboard driver disk 5 two sata cables 4
- User s manual 5 i o shield 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the memory 8
- 4 installing an expansion card 8
- 5 back panel connectors 8
- D sub port 8
- Dualchannelmemoryconfiguration 8
- Parallel port 8
- Serial port 8
- Hdmi port 9
- Line in jack blue 9
- Line out jack green 9
- Mic in jack pink 9
- Rj 45 lan port 9
- Usb 3 2 port 9
- 6 internal connectors 10
- 2 atx_12v atx 2x2 12v power connector and 2x12 main power connector 11
- 4 cpu_fan sys_fan fan headers 11
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 11
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 11
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 11
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one danger of explosion if the battery is replaced with 12
- An incorrect model 12
- Bat battery 12
- Connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 12
- Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 12
- Of the battery the positive side should face up 12
- Or uncertain about the battery model 12
- Sata3 0 1 sata 6gb s connectors 12
- Speaker speaker header 12
- The battery provides power to keep the values such as bios configurations date and time information in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 12
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device 12
- Used batteries must be handled in accordance with local environmental regulations 12
- When installing the battery note the orientation of the positive side and the negative side 12
- Connect the power switch reset switch and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 13
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 13
- F_audio front panel audio header 13
- F_panel front panel header 13
- Hd hard drive activity led blue connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 13
- Nc purple no connection 13
- Pled power led yellow 13
- Pw power switch red connects to the power switch on the chassis front panel you may configure the way to turn off your system using the power switch refer to chapter 2 bios setup power management for more information 13
- Res reset switch green connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 13
- The front panel audio header supports intel high definition audio hd and ac 97 audio you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 13
- Ci chassis intrusion header 14
- Clr_cmos clear cmos jumper 14
- Comb serial port header 14
- F_usb1 f_usb2 usb 2 1 headers 14
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 14
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 14
- This motherboard provides a chassis detection feature that detects if the chassis cover has been removed this function requires a chassis with chassis intrusion detection design 14
- Use this jumper to clear the bios configuration and reset the cmos values to factory defaults to clear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 14
- Chapter 2 bios setup 15
- 1 main 16
- Access level 16
- Displays the current access level depending on the type of password protection used if no password is set the default will display as administrator the administrator level allows you to make changes to all bios settings the user level only allows you to make changes to certain bios settings but not all 16
- Its defaults 16
- Key to set the desired value 16
- Main menu help the on screen description of a highlighted setup option is displayed on the bottom line of the main menu submenu help 16
- Sample bios version f3b 16
- Selects the default language used by the bios 16
- System date 16
- System language 16
- System time 16
- The bios setup menus described in this chapter are for reference only and may differ by bios 16
- This section provides information on your motherboard model bios version and memory information you can also select the default language used by the bios and manually set the system time 16
- To accept or enter a sub menu 16
- To exit the help screen help for each item is in the item help block on the right side of the submenu 16
- Version 16
- When the system is not stable as usual select the restore defaults item to set your system to 16
- 2 advanced 17
- Allows you to configure the maximum tolud value 2 gb is the default 17
- Allows you to set the memory voltage options are 1 5v 1 0v auto auto lets the bios automatically configure this setting default auto 17
- Configures the way to turn off the computer in ms dos mode using the power button 17
- Cpu temperature system temperature 17
- Ddr voltage control 17
- Delay 4 sec 17
- Determines the state of the system after the return of power from an ac power loss 17
- Displays current cpu system temperature 17
- Enables or disables dummy load when the power supply is at low load a self protection will activate causing it to shutdown or fail if this occurs please set to enabled auto lets the bios automatically configure this setting default auto 17
- Enables or disables the onboard lan function default enabled 17
- Hardware monitor 17
- If you wish to install a 3rd party add in network card instead of using the onboard lan set this item to if you wish to install a 3rd party add in network card instead of using the onboard lan set this item to disabled 17
- Instant off press the power button and then the system will be turned off instantly default 17
- Last state the system returns to its last known awake state upon the return of the ac power 17
- Max tolud 17
- Onboard lan controller 17
- Power loading 17
- Power off the system stays off upon the return of the ac power default 17
- Power on the system is turned on upon the return of the ac power 17
- Press and hold the power button for 4 seconds to turn off the system if the power button is pressed for less than 4 seconds the system will enter suspend mode 17
- Realtek pcie gbe family controller 17
- Restore ac power loss 17
- Soft off by pwr bttn 17
- This sub menu provides information on lan configuration and related configuration options 17
- Case intrusion prompt 18
- Case open 18
- Cpu system fan speed 18
- Cpuconfiguration 18
- Integratrd graphics device 18
- Intel virtualization technology 18
- Inteligdconfiguration 18
- Limit cpuid maximum 18
- Power technology 18
- Reset case open status 18
- Sio misc functions 18
- Turbo mode 18
- Vcore vcc3 12v vcc cpu_vaxg vnn ddr1_35v 18
- Csm support 19
- Csmconfiguration 19
- Ipv4 pxe support 19
- Ipv6 pxe support 19
- Media detect count 19
- Network 19
- Network stack 19
- Networkstackconfiguration 19
- Port 0 1 19
- Pxe boot wait time 19
- Sata controller 19
- Sata interface speed 19
- Sataconfiguration 19
- Serial ata port 0 1 19
- Sioconfiguration 19
- Storage 19
- Intel rmt support 20
- Intelrmtconfiguration 20
- Legacy usb support 20
- Mass storage devices 20
- Other pci devices 20
- Usb mass storage driver support 20
- Usbconfiguration 20
- Xhci mode 20
- 3 security 21
- Administrator password 21
- Again when prompted to confirm 21
- Displays a list of connected hard drives and allows you to set a password for a specific hard drive this item appears only when a hard drive is installed 21
- Displays the current secure boot state 21
- Displays the current system mode 21
- Displays the vendor keys 21
- Hddsecurityconfiguration 21
- Note before setting the user password be sure to set the administrator password first note before setting the user password be sure to set the administrator password first 21
- Secure boot 21
- Secure boot menu 21
- System mode 21
- User password 21
- Vendor keys 21
- You must enter the administrator password or user password at system startup and when entering bios setup differing from the user password the administrator password allows you to make changes to all bios settings 21
- You must enter the administrator password or user password at system startup and when entering bios setup however the user password only allows you to make changes to certain bios settings but not all 21
- 4 boot 22
- All sata devices 22
- All sata devices are functional in the operating system and during the post default 22
- Allows you to configure the number of seconds to stay in bios setup prompt screen default 6 22
- Allows you to configure the secure boot mode default standard 22
- Allows you to determine whether to display the gigabyte logo at system startup disabled skips the gigabyte logo when the system starts up default enabled 22
- Boot process completes 22
- Bootup numlock state 22
- Enables or disables fast boot to shorten the os boot process default disabled 22
- Enables or disables numlock feature on the numeric keypad of the keyboard after the post default on 22
- Enables or disables the secure boot function secure boot requires all the applications that are running during the booting process to be pre signed with valid digital certificates this way the system knows all the files being loaded before windows 8 loads and gets to the login screen have not been tampered with default enabled 22
- Fast boot 22
- Full screen logo show 22
- Key management 22
- Last boot hdd only except for the previous boot drive all sata devices are disabled before the os 22
- Sata support 22
- Secure boot 22
- Secure boot mode 22
- Setup prompt timeout 22
- This item is configurable only when this item is configurable only when fast boot is set to enabled 22
- This section provides you with configuration options for secure boot key management 22
- Boot option 1 2 3 23
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 23
- Network stack driver support 23
- New boot option policy 23
- Ps2 devices support 23
- Usb support 23
- Vga support 23
- 5 save exit 24
- Boot override 24
- Discard changes 24
- Discard changes and reset 24
- Launchefishellfromfilesystemdevice 24
- Restore defaults 24
- Restore user defaults 24
- Save as user defaults 24
- Save changes 24
- Save changes and reset 24
- Chapter 3 appendix 25
- Drivers installation 25
- Our commitment to preserving the environment 26
- Regulatory notices 26
- Regulatory statements 26
- Restriction of hazardous substances rohs directive statement 26
- Waste electrical electronic equipment weee directive statement 26
- Weee symbol statement 26
- Canada industry canada ic notices canada avis d industry canada ic 27
- Fcc notice u s a only 27
- Contact us 28
- Gigabyte esupport 28
- To submit a technical or non technical sales marketing question please link to http esupport gigabyte com 28
Похожие устройства
- Gigabyte ga-n3050n-d3h Инструкция по эксплуатации
- Gigabyte gsmart classic grey Инструкция по эксплуатации
- Gigabyte ga-n3150m-d3p Инструкция по эксплуатации
- Gigabyte ga-n3150n-d2h Инструкция по эксплуатации
- Gigabyte ga-n3150n-d3v Инструкция по эксплуатации
- Gigabyte ga-z170-hd3p Инструкция по эксплуатации
- Gigabyte ga-b150m-d2v Инструкция по эксплуатации
- Gigabyte ga-h110m-s2hp Инструкция по эксплуатации
- Gigabyte ga-h110m-s2 Инструкция по эксплуатации
- Gigabyte brix gb-bace-3000 Инструкция по эксплуатации
- Gigabyte ga-h110m-s2h Инструкция по эксплуатации
- Gigabyte ga-z170-gaming k3. v1. Инструкция по эксплуатации
- Gigabyte ga-x99-gaming 5p Инструкция по эксплуатации
- Gigabyte ga-x99p-sli Инструкция по эксплуатации
- Gigabyte ga-h170-gaming 3 Инструкция по эксплуатации
- Gigabyte ga-h170-d3h Инструкция по эксплуатации
- Gigabyte ga-h170-hd3 Инструкция по эксплуатации
- Gigabyte ga-b150n phoenix-wifi Инструкция по эксплуатации
- Gigabyte ga-x150-pro ecc Инструкция по эксплуатации
- Gigabyte ga-x170-extreme ecc Инструкция по эксплуатации
Скачать
Случайные обсуждения