Smeg F608SN [26/30] Instructions for the installer

Instructions for the installer

11.INSTALLING THE APPLIANCE

11.1 Electrical connection

The identification plate bearing the technical data, serial number and brand

name is visibly positioned on the appliance.

Do not remove this plate for any reason.

The appliance must be connected to earth in compliance with electrical system

safety regulations.

If a fixed connection is being used, fit the power line with an omnipolar circuit-

breaker in accordance with the installation rules, located in a position which is

easy to reach and near the appliance.

If a plug and socket connection is being used, make sure that the plug and

socket are compatible. Avoid use of adapters and shunts as these could cause

overheating and a risk of burns.

Operation at 220-240 V~:

use a H05V2V2-F type

three-core cable (3 x 1.5 mm

The end to be connected to the appliance must

have an earth wire (yellow-green) at least 20 mm

longer than the others.

WARNING: The values indicated above refer to the cross-section of the internal

conductor.