Gorenje gis 62 xc [12/32] Hob control

410425

• After connecting the glass ceramic hob to the power

mains, all symbols on the display will light up brieﬂ y. The

cooking hob is then ready for operation.

• Cooking hob is controlled by means of electronic touch

sensors which are activated by light pressure of a

ﬁ ngertip for at least 1 second.

• Each touch of a sensor is signaled by short beep.

• Avoid placing any objects upon the surface of touch

sensors. Also, try to keep the surface of touch sensors

clean at all times.

Touch the ON/OFF button (A) for at least 1 second. The

hob is on and hotplate displays are illuminated.

If no further action or setting is taken within the

following 20 seconds, the hob is automatically

switched o .

When the hob is switched on with the ON/OFF button

(A), you may during the next 20 seconds switch on the

selected hotplate.

Displays also function as control buttons by which

you may change power settings.

• Touch the hotplate selection key (B), decimal dot (B2)

adjacent to the selected hotplate display is switched on

and slider keys (C) are displayed.

• By touching the slider keys select the required power

setting from 1 to 9 or P.

• During the following 10 seconds slider keys are switched

o and decimal dot disappears. Hotplate is active.

Slider sensor keys (C, D) react better if touched

from the bottom. The same goes for sensors (E, F).

Changing the hotplate power setting

• Select the appropriate hotplate by touching the key (B).

Decimal dot (B2) adjacent to the selected hotplate display

is switched on, and slider sensor keys are illuminated.

Depending on the selected power setting, slider keys light

up to the selected power setting, while the remaining idle

keys are ﬂ ashing.

(Example: in case of selected power setting 6, the ﬁ rst 6

Switching the hob on

Switching the hotplate

HOB CONTROL