Gorenje gis 62 xc [27/32] Connection to the power supplay

410425

• Connections may be carried out by a qualiﬁ ed

technician only. The earthing protection must comply

with the standing regulations.

• Connection terminals are revealed when the connection

box cover is removed.

• Prior any attempted connection check that the voltage

indicated on the rating plate is in line with your home

power supply.

• The rating plate is located underneath the appliance.

• The appliance is manufactured for use with the power

supply voltage 230 V ~.

• The electric wiring should be equipped with a circuit

breaker able to isolate the appliance from the mains

in all points, with the distance between terminals of

at least 3 mm in open position. This may be done by

means of fuses, safety switches, etc.

• The connection should be selected in accordance with

the declared charge capacity of the mains and the fuse

power.

• Such appliances are allowed to be mounted on one

side next to a high kitchen cabinet, the height of which

may exceed that of the appliance. On the opposite side

however, only a kitchen cabinet of equal height as the

appliance is allowed.

• Upon the completion of installation, live wires and

isolated cables must be adequately protected against

accidental touching.

ATTENTION !

Before attempting any repairs on the appliance,

disconnect the power supply. In accordance with the

mains voltage the appliance should be connected in line

with the attached diagram. The earthing wire (PE) must

be connected to the terminal marked with the earthing

symbol

The connection cable must lead through the relief safety

device, protecting it from accidental pulling out. Upon the

completion of installation switch all the hotplates on for

about 3 minutes to check the proper functioning.

Use a ﬂ at screwdriver to open the connection clip.

When connecting the appliance, use the jumper

connectors supplied.

CONNECTION TO THE POWER SUPPLAY