HP pavilion mini 300-030ur, l1v76ea [15/31] Keyboard and mouse with cable

Keyboard and mouse (with cable)

Symptom Possible solution

Keyboard commands and

typing are not recognized

by the computer

Use the mouse to turn off the computer. Disconnect and reconnect the keyboard to the back of your computer, and

then restart your computer.

Mouse (with cable) does

not work or is not detected

Disconnect and reconnect the mouse cable to your computer.

If the mouse is still not detected, turn off the computer, disconnect and reconnect the mouse cable, and then restart

the computer.

on most—not all—programs).

3. Repeat step 1 and step 2 to save changes in all open programs.

4. Press the power button to turn off the computer.

5. After the shutdown is complete, disconnect and reconnect the mouse cable to the back of your computer, and

then restart your computer.

Keyboard and mouse (wireless)

Symptom Possible solution

Wireless keyboard or

mouse does not work or is

not detected

Be sure that you are using the wireless keyboard or wireless mouse within range of the transceiver,

approximately 10 meters (32 feet) for normal use, and within 30 cm (12 inches) during initial setup or for re-

synchronization.

●

Re-synchronize the keyboard and mouse to the transceiver using the following steps.

NOTE: Depending on your computer model, the transceiver may be preinstalled in a USB port that is not visible from

the outside of the computer.

The transceiver, wireless keyboard, and wireless mouse shown in the following illustrations are examples; your model

might vary.

IMPORTANT: During these steps, place the wireless keyboard and wireless mouse on the same level as the

transceiver, within 30 cm (12 inches) of the transceiver, and away from interference from other devices.

1. Disconnect the transceiver from a USB port on the computer, and then reconnect it. Your computer model might

have a port dedicated to the transceiver.