Karcher NT 55/1 Tact Te M [21/268] Troubleshooting

Karcher NT 55/1 Tact Te M [21/268] Troubleshooting
- 6
from the danger area. To avoid a distri-
bution of the dust, you must take the ap-
propriate measures.
In the framework of maintenance and
repair work all contaminated objects
that cannot be cleaned satisfactorily
must be disposed of. Such objects must
be disposed of in impermeable bags in
accordance with the valid provisions for
the disposal of such waste.
During the transport and maintenance
of the appliance the extraction opening
is to be closed with the connection
socket.
Warning
Safety equipment for preventing hazards
must be serviced and maintained regularly.
This means that the manufacturer's staff or
persons trained by the manufacturer must
check the equipment for proper functioning
at least once a year, i.e. check for leaks, fil-
ter damage, functioning of the controlling
elements, etc.
Caution
Risk of damage! Do not use detergents
containing silicone to clean.
No outside help is required for carrying
out basic maintenance and cleaning.
The appliance surface and the inside of
the container should be cleaned regu-
larly using a damp cloth.
Danger
Risk due to dust hazardous to health. Always
use disposal clothing and P2 or higher breath-
safe masks while carrying out maintenance
tasks (such as changing filters).
Î Open filter door.
Î Take out the flat folded filter.
Î Dispose off the used flat-folded filter in
a dust-tight bag according to the statu-
tory provisions.
Î Remove the dirt that has accumulated
on the pure air side.
Î Insert new flat-folded filter.
Î Close the filter door, it must lock into
place.
Illustration
Î Close the suction connection, see wet
vacuuming.
Illustration
Î Release and remove the suction head.
Î Pull the paper filter bag out towards the
rear.
Î Pull the locking slide up and seal the pa-
per filter bag tightly when removing it.
Î Dispose off the used paper filter bag in
a dust-tight bag according to the statu-
tory provisions.
Î Insert the new paper filter bag.
Î Insert and lock the suction head.
Illustration
Î Release and remove the suction head.
Î Remove the membrane filter.
Î Pull the new membrane filter over the
container edge.
Î Insert and lock the suction head.
Î Release and remove the suction head.
Î Clean the electrodes with a brush.
Î Insert and lock the suction head.
Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note:In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
Î Check cables, plugs, fuse, socket and
electrodes.
Î Turn on the appliance.
Exchanging the flat pleated filter
Exchanging the paper filter bag
Close the suction connection
Exchanging the paper filter bag
Replace membrane filter
Cleaning the electrodes
Troubleshooting
Suction turbine does not run
21EN

Содержание

Скачать