Intex explorer pro 100 58355 [6/11] Inflating instructions

93A

(93IO) "ISO" BOAT W/O MOTOR MOUNTING (TYPE I) ENGLISH 7.5” X 10.3” 04/29/2013

SAVE THESE INSTRUCTIONS

Page 6

Inflating Instructions

Before starting, locate a clean area free of stones or other sharp objects. Unroll the boat so it is laid

out flat, and locate your pump.

Use a hand or foot operated air pump to inflate the boat. Do not use high-pressure air compressors.

Adults should inflate the chambers following the numerical sequence marked on the valves. It is

very important to follow the numerical sequence; failure to do so will result in an improperly inflated

boat. Fill each chamber until it is stiff to the touch but NOT hard. Use the enclosed ruler to check the

main chamber for proper inflation by leveling it with the gauges printed on the boat. DO NOT OVER

INFLATE. Fill with cold air only.

IMPORTANT: Air temperature and weather condition do affect the internal air pressure of inflatable

products. In cold weather the product will lose some pressure due to the fact that the air will contract.

If this occurs, you may want to add a little air to the product. However, in hot weather, the air will

expand. You must let some air out to prevent the product from failing due to overpressure.

How to Use Boston Valve:

1. Double valve cap (valve lets air in, not out).

2. Quick deflation cap.

3. Unscrew Double valve cap.

4. Insert output end of air pump into valve and fill. Do not over inflate or use high pressure

compressor.

5. To deflate: Unscrew quick-deflation cap. CAUTION: Double valve does not operate when this cap

is off. Do not unscrew this cap while boat or inflatable is in water.

Fishing Rod Holder Use (Certain Models):

1. Slide the end cap over the end of the fishing rod.

2. Insert the fishing pole into the holder.

Fishing Rod Holder

Fishing Rod

Holder

End Cap

Fishing

Rod