![MSI b150 pc mate [2/80] Safety information](/img/pdf.png)
MSI b150 pc mate [2/80] Safety information
2
Safety Information
Safety Information
● The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
● Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
● Hold the motherboard by the edges to avoid touching sensitive components.
● It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard.
● Store the motherboard in an electrostatic shielding container or on an anti-static pad
whenever the motherboard is not installed.
● Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
● Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
● If you need help during any installation step, please consult a certified computer
technician.
● Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
● Keep this user guide for future reference.
● Keep this motherboard away from humidity.
● Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
● Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
● All cautions and warnings on the motherboard should be noted.
● If any of the following situations arises, get the motherboard checked by service
personnel:
▶ Liquid has penetrated into the computer.
▶ The motherboard has been exposed to moisture.
▶ The motherboard does not work well or you can not get it work according to user
guide.
▶ The motherboard has been dropped and damaged.
▶ The motherboard has obvious sign of breakage.
● Do not leave this motherboard in an environment above 60°C (140°F), it may
damage the motherboard.
Содержание
- Regulatory notices 1
- Unpacking 1
- Safety information 2
- Preparing tools and components 3
- Quick start 3
- Installing a processor 4
- Installing ddr4 memory 5
- Connecting the front panel header 6
- Hdd led 6
- Hdd led hdd led hdd led 6
- Http youtu be dpelidvnzui 6
- Power led power led power led 6
- Installing the motherboard 7
- Installing sata drives 8
- Installing a graphics card 9
- Connecting peripheral devices 10
- Connecting the power connectors 11
- Power on 12
- Block diagram 9 13
- Contents 13
- Overview of components 2 13
- Quick start 13
- Rear i o panel 0 13
- Safety information 13
- Specifications 5 13
- Unpacking 13
- Bios setup 6 14
- Raid configuration optional 1 14
- Regulatory notices 7 14
- Software description 7 14
- Troubleshooting 6 14
- Specifications 15
- Block diagram 19
- After installing the realtek hd audio driver the realtek hd audio manager icon will appear in the system tray double click on this icon to launch 20
- Black b150 pc mate 20
- Blue h170a pc mate 20
- Dvi d port 20
- Lan port led status table 20
- Line in 20
- Line out 20
- Link activity led 20
- Mic in 20
- Ps 2 keyboard 20
- Ps 2 mouse lan 20
- Realtek hd audio manager 20
- Rear i o panel 20
- Speed led 20
- Usb 3 gen1 20
- Usb 3 gen2 20
- Vga port 20
- Audio 7 channel configuration 21
- Overview of components 22
- Component contents 23
- Cpu socket 24
- Important 24
- Introduction to the lga 1151 cpu 24
- Dimm slots 25
- Important 25
- Memory module installation recommendation 25
- Important 26
- Pci_e1 5 pci1 2 pcie pci expansion slots 26
- Pcie slots bandwidth table 26
- Important 27
- Sata1 6 sata 6gb s connectors 27
- Se1_21 satae connector 27
- Important 28
- Installing m module 28
- M2_1 m slot 28
- Video demonstration 28
- Important 29
- Jfp1 jfp2 front panel connectors 29
- M sata satae combination table 29
- Important 30
- Jpwr1 2 power connectors 30
- Make sure that all the power cables are securely connected to a proper atx power supply to ensure stable operation of the motherboard 30
- These connectors allow you to connect an atx power supply 30
- Important 31
- In order to recharge your ipad iphone and ipod through usb ports please install ms 31
- Jusb1 2 usb 2 connectors 31
- Jusb3 usb 3 gen1 connector 31
- Note that the power and ground pins must be connected correctly to avoid possible damage 31
- Note that the vcc and ground pins must be connected correctly to avoid possible damage 31
- Super charger utility 31
- These connectors allow you to connect usb 2 ports on the front panel 31
- This connector allows you to connect usb 3 gen1 ports on the front panel 31
- Jaud1 front audio connector 32
- Jcom1 serial port connector 32
- Jtpm1 tpm module connector 32
- Overview of components 32
- This connector allows you to connect audio jacks on the front panel 32
- This connector allows you to connect the optional serial port with bracket 32
- This connector is for tpm trusted platform module please refer to the tpm security platform manual for more details and usages 32
- Bios hardware monitor sub menu allows you to set the temperature levels and the 33
- Command center offers gradient points of the fan speed that allow you to adjust 33
- Controlling the fan speed 33
- Corresponding fan speed levels 33
- Cpufan1 2 sysfan1 3 fan connectors 33
- Fan connectors can be classified as pwm pulse width modulation mode and voltage mode pwm mode fan connectors provide constant 12v output and adjust fan speed with speed control signal voltage mode fan connectors control fan speed by changing voltage therefore when you plug a 3 pin non pwm fan to a pwm mode fan connector the fan speed will be always maintained at 100 and that could be noisy 33
- Fan speed in relation to cpu temperature 33
- Hardware monitor the other is to use command center application 33
- Pwm mode fan connector 33
- Voltage mode fan connector 33
- Clear cmos reset bios 34
- Default 34
- Jbat1 clear cmos reset bios jumper 34
- Jlpt1 parallel port connector 34
- Keep data 34
- Plug the power cord and power on the computer 34
- Power off the computer and unplug the power cord 34
- Remove the jumper cap from jbat1 34
- Resetting bios to default values 34
- There is cmos memory onboard that is external powered from a battery located on the motherboard to save system configuration data if you want to clear the system configuration set the jumpers to clear the cmos memory 34
- This connector allows you to connect the optional parallel port with bracket 34
- Use a jumper cap to short jbat1 for about 5 10 seconds 34
- Ez debug led debug led indicators 35
- Jci1 chassis intrusion connector 35
- Resetting the chassis intrusion warning 35
- Using chassis intrusion detector 35
- Bios setup 36
- Entering bios setup 36
- Function key 36
- Important 36
- Resetting bios 37
- Updating bios 37
- Updating bios with m flash 37
- Updating the bios with live update 6 37
- Important 38
- System status menu 38
- Advanced menu 39
- Important 43
- Important 46
- Overclocking menu 46
- M flash menu 52
- Important 53
- Security menu 53
- Boot menu 55
- Save exit menu 56
- Installing drivers 57
- Installing utilities 57
- Installing window 57
- Installing windows 7 8 10 57
- Software description 57
- Command center 58
- Cpu frequency 58
- Important 58
- Profile buttons 58
- Cpu fan 59
- Cpu voltage 59
- Dram frequency dram voltage 59
- Igp frequency gt voltage 59
- Option buttons advanced 60
- Option buttons setting 60
- Gadget mode 61
- Option buttons information 61
- Live update 6 62
- Updating the system 62
- Total installer 63
- M cloud 64
- Important 65
- Installing cloud storage 65
- Setting up soft ap optional 65
- Important 66
- Managing user accounts 66
- Transferring files 66
- Creating a ram disk 67
- Ramdisk 67
- Network genie 68
- Network genie control panel 68
- Configuring application s network priority 69
- Configuring network speed 69
- Extreme tuning utility 70
- Intel extreme tuning utility 70
- Important 71
- Raid configuration optional 71
- Raid level comparison 71
- Rapid storage technology option rom 71
- Using inte 71
- Using intel rapid storage technology option rom 71
- Creating raid volume 72
- Important 72
- Delete raid volume 73
- Here you can delete the raid volume but please be noted that all data on raid drives will be lost 73
- If your system currently boots to raid and you delete the raid volume in the irst option rom your system will become unbootable 73
- Important 73
- Press y key to accept the volume deletion 73
- Raid configuration optional 73
- Reset disks to non raid 73
- Select option delete raid volume from the main menu screen and press enter key to select a raid volume for deletion then press delete key to delete the selected raid volume the following screen appears 73
- Select option reset disks to non raid from the main menu screen and press enter to delete the raid volume and remove any raid structures from the drives use the space key to select the disks and press enter key a confirmation sentence will appear below and then press y key to accept the selection 73
- Degraded raid array 74
- Important 74
- Missing hard drive member 74
- Recovery volume options 74
- Failed hard drive member 75
- Lost bios password 76
- The computer does not boot after updating the bios 76
- The power is not on 76
- The power is on but no signal to monitor 76
- The usb device is not working 76
- There is no audio 76
- There is no network 76
- Troubleshooting 76
- Battery information 77
- B급 기기 가정용 방송통신기자재 77
- C tick compliance 77
- Ce conformity 77
- Chemical substances information 77
- Fcc compliance statement 77
- Regulatory notices 77
- クラスb情報技術装置 77
- Regulatory notices 78
- Weee waste electrical and electronic equipment statement 78
- Environmental policy 79
- India rohs 79
- Regulatory notices 79
- Türkiye eee yönetmeliği 79
- Việt nam rohs 79
- Україна обмеження на наявність небезпечних речовин 79
- 日本jis c 0950材質宣言 79
- Copyright 80
- Regulatory notices 80
- Revision history 80
- Technical support 80
- Trademark recognition 80
- 产品中有害物质的名称及含量 80
Похожие устройства
- MSI b150m pro-vdh Инструкция по эксплуатации
- MSI b150m pro-dh Инструкция по эксплуатации
- MSI h170a gaming pro Инструкция по эксплуатации
- MSI h170a pc mate Инструкция по эксплуатации
- MSI h170m pro-vdh Инструкция по эксплуатации
- MSI h170m pro-dh Инструкция по эксплуатации
- MSI 24ge 2qe-028ru, 9s6-ae6b11-028 Инструкция по эксплуатации
- MSI 24ge 2qe-027ru, 9s6-ae6b11-027 Инструкция по эксплуатации
- MSI ag270 2ql-208ru, 9s6-af1811-208 Инструкция по эксплуатации
- MSI ag270 2qc-202ru, 9s6-af1811-202 Инструкция по эксплуатации
- MSI ag270 2qc-203ru, 9s6-af1811-203 Инструкция по эксплуатации
- MSI ag270 2qe-209ru, 9s6-af1811-209 Инструкция по эксплуатации
- MSI cubi-079xru, 9s6-b09612-079 Инструкция по эксплуатации
- MSI cubi-082xru, 9s6-b09612-082 Инструкция по эксплуатации
- MSI cubi-084xru, 9s6-b09612-084 Инструкция по эксплуатации
- MSI cubi-083ru, 9s6-b09612-083 Инструкция по эксплуатации
- MSI cubi-080xru, 9s6-b09612-080 Инструкция по эксплуатации
- MSI cubi-081xru, 9s6-b09612-081 Инструкция по эксплуатации
- MSI cubi-085xru, 9s6-b09612-085 Инструкция по эксплуатации
- MSI h170 gaming m3 Инструкция по эксплуатации
Скачать
Случайные обсуждения