![Makita 5477nb Инструкция по эксплуатации онлайн [4/32] 159580](/img/pdf.png)
Makita 5477nb Инструкция по эксплуатации онлайн [4/32] 159580
![Makita 5477nb Инструкция по эксплуатации онлайн [4/32] 159580](/views2/1175363/page4/bg4.png)
4
3. Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
4. Never hold piece being cut in your hands or
across your leg. Secure the workpiece to
stable platform. It is important to support the
work properly to minimize body exposure, blade
binding, or loss of control.
A typical illustration of proper hand support, workpiece
support, and supply cord routing (if applicable).
000157
5. Hold power tool by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will also
make exposed metal parts of the power tool "live"
and shock the operator.
6. When ripping always use a rip fence or
straight edge guide. This improves the accuracy
cut and reduces the chance of blade binding.
7. Always use blades with correct size and shape
(diamond versus round) of arbour holes.
Blades that do not match the mounting hardware
of the saw will run eccentrically, causing loss of
control.
8. Never use damaged or incorrect blade
washers or bolt. The blade washers and bolt
were specially designed for your saw, for optimum
performance and safety of operation.
9. Causes and Operator Prevention of Kickback:
− kickback is a sudden reaction to a pinched,
bound or misaligned saw blade, causing an
uncontrolled saw to lift up and out of the
workpiece toward the operator;
− when the blade is pinched or bound tightly by
the kerf closing down, the blade stalls and the
motor reaction drives the unit rapidly back
toward the operator;
− if the blade becomes twisted or misaligned in
the cut, the teeth at the back edge of the
blade can dig into the top surface of the wood
causing the blade to climb out of the kerf and
jump back toward the operator.
Kickback is the result of saw misuse and/or
incorrect operating procedures or conditions and
can be avoided by taking proper precautions as
given below.
• Maintain a firm grip with both hands on the
saw and position your arms to resist
kickback forces. Position your body to
either side of the blade, but not in line with
the blade. Kickback could cause the saw to
jump backwards, but kickback forces can be
controlled by the operator, if proper
precautions are taken.
• When blade is binding, or when
interrupting a cut for any reason, release
the trigger and hold the saw motionless in
the material until the blade comes to a
complete stop. Never attempt to remove
the saw from the work or pull the saw
backward while the blade is in motion or
kickback may occur. Investigate and take
corrective actions to eliminate the cause of
blade binding.
• When restarting a saw in the workpiece,
centre the saw blade in the kerf and check
that saw teeth are not engaged into the
material. If saw blade is binding, it may walk
up or kickback from the workpiece as the saw
is restarted.
• Support large panels to minimise the risk
of blade pinching and kickback. Large
panels tend to sag under their own weight.
Supports must be placed under the panel on
both sides, near the line of cut and near the
edge of the panel.
To avoid kickback, do support
board or panel near the cut.
000154
Содержание
- Hypoid saw scie hypoïde sierra circular 1
- Instruction manual manuel d instruction manual de instrucciones 1
- General power tool safety warnings 2
- Save all warnings and instructions for future reference 2
- Specifications 2
- 6 18 16 16 14 18 16 14 12 6 10 10 12 16 16 14 12 12 16 14 12 not recommended 3
- Ampere rating volts total length of cord in feet 3
- More than not more than awg 3
- Specific safety rules 3
- Table 1 minimum gage for cord 3
- V 25 ft 50 ft 100 ft 150 ft 3
- Adjusting depth of cut 6
- Functional description 6
- Save these instructions 6
- Symbols 6
- Warning 6
- Assembly 7
- Bevel cutting 7
- Hex wrench storage 7
- Removing or installing saw blade 7
- Sighting 7
- Switch action 7
- Operation 8
- Rip fence guide rule optional accessory 8
- Adjusting for accuracy of 90 and 45 cut vertical and 45 cut 9
- Hook optional accessory 9
- Maintenance 9
- Replacing carbon brushes 9
- Accessories 10
- Caution 10
- Hex wrench 10
- Makita limited one year warranty 10
- Rip fence guide rule 10
- Steel carbide tipped saw blades 10
- These accessories or attachments are recommended for use with your makita tool specified in this manual the use of any other accessories or attachments might present a risk of injury to persons only use accessory or attachment for its stated purpose if you need any assistance for more details regarding these accessories ask your local makita service center 10
- Conservez toutes les mises en garde et instructions pour référence future 11
- Consignes de sécurité générales pour outils électriques 11
- Spécifications 11
- 6 18 16 16 14 18 16 14 12 6 10 10 12 16 16 14 12 12 16 14 12 non recomman 13
- Intensi 13
- Nominale volts longueur totale du cordon en pieds 120 v 25 pi 50 pi 100 pi 150 pi 13
- Plus de pas plus de calibre a 13
- Ricain des fils 13
- Règles de sécurité particulières 13
- Tableau 1 gabarit minimum du cordon 13
- Avertissement 16
- Conservez ce mode d emploi 16
- Description du fonctionnement 16
- Réglage de la profondeur de coupe 16
- Symboles 16
- Assemblage 17
- Coupe en biseau 17
- Interrupteur 17
- Rangement de la clé hexagonale 17
- Retrait ou pose de la lame 17
- Visée 17
- Utilisation 18
- Crochet accessoire en option 19
- Entretien 19
- Garde parallèle règle de guidage accessoire en option 19
- Remplacement des charbons 19
- Réglage de précision pour les coupes de 90 et 45 coupes à angle droit et à 45 19
- Accessoires 20
- Garantie limitée d un an makita 20
- Advertencias de seguridad generales para herramientas eléctricas 21
- Clavija de conexión de ninguna forma no utilice ninguna clavija adaptadora con herramientas eléctricas que tengan conexión a tierra puesta a tierra 21
- Especificaciones 21
- Guarde todas las advertencias e instrucciones para su futura referencia 21
- La utilización de clavijas no modificadas y que encajen perfectamente en la toma de corriente reducirá el riesgo de que se produzca una descarga eléctrica 21
- Las clavijas de conexión de las herramientas eléctricas deberán encajar perfectamente en la toma de corriente no modifique nunca la 21
- Esto asegura que se mantenga la seguridad de la herramienta eléctrica 22
- Haga que una persona calificada repare la herramienta utilizando sólo piezas de repuesto idénticas 22
- A 6 a 18 16 16 14 18 16 14 12 6 a 10 a 10 a 12 a 16 16 14 12 12 a 16 a 14 12 no se recomienda 23
- Amperaje nominal 23
- Nimo para el cable 23
- Normas específicas de seguridad advertencias y precauciones 23
- S de calibre del cable awg 23
- S de no 23
- Tabla 1 calibre 23
- Volts longitud total del cable en metros 120 v 23
- Advertencia 26
- Guarde estas instrucciones 26
- Símbolos 26
- Accionamiento del interruptor 27
- Ajuste de la profundidad de corte 27
- Corte en bisel 27
- Descripción del funcionamiento 27
- Ensamble 27
- Guía visual 27
- Almacenamiento de la llave de allen hexagonal 28
- Desmontaje o instalación del disco de sierra 28
- Operación 28
- Ajuste de la precisión de corte de 90 y 45 corte de 45 y vertical 29
- Gancho accesorio opcional 29
- Guía lateral regla guía accesorio opcional 29
- Mantenimiento 29
- Accesorios 30
- Garantía limitada makita de un año 30
- Reemplazamiento de las escobillas de carbón 30
- Advertencia 32
- Makita corporation 32
- Warning 32
Похожие устройства
- Makita dbc3310 Инструкция по эксплуатации
- Makita dbc400 Инструкция по эксплуатации
- Makita dbc4010 Инструкция по эксплуатации
- Makita dbc4510 Инструкция по эксплуатации
- Makita uh200dwx Инструкция по эксплуатации
- Makita hp330dx100 Инструкция по эксплуатации
- Makita 4328 Инструкция по эксплуатации
- Makita 4329k Инструкция по эксплуатации
- Makita 5603r Инструкция по эксплуатации
- Makita 5903r Инструкция по эксплуатации
- Makita elm3800 Инструкция по эксплуатации
- Makita 5903rk Инструкция по эксплуатации
- Makita 6261dwple Инструкция по эксплуатации
- Makita 6317dwae Инструкция по эксплуатации
- Makita 6317dwde Инструкция по эксплуатации
- Makita 6347dwde Инструкция по эксплуатации
- Makita 6501 Инструкция по эксплуатации
- Makita 9237cb Инструкция по эксплуатации
- Makita 9069f Инструкция по эксплуатации
- Makita 9558hnk Инструкция по эксплуатации