![Makita 5477nb Инструкция по эксплуатации онлайн [5/32] 159580](/img/pdf.png)
Makita 5477nb Инструкция по эксплуатации онлайн [5/32] 159580
![Makita 5477nb Инструкция по эксплуатации онлайн [5/32] 159580](/views2/1175363/page5/bg5.png)
5
Do not support board or
panel away from the cut.
000156
• Do not use dull or damaged blades.
Unsharpened or improperly set blades
produce narrow kerf causing excessive friction,
blade binding and kickback.
• Blade depth and bevel adjusting locking
levers must be tight and secure before
making cut. If blade adjustment shifts while
cutting, it may cause binding and kickback.
• Use extra caution when making a "plunge
cut" into existing walls or other blind areas.
The protruding blade may cut objects that can
cause kickback.
10. Check lower guard for proper closing before
each use. Do not operate the saw if lower
guard does not move freely and close instantly.
Never clamp or tie the lower guard into the
open position. If saw is accidentally dropped,
lower guard may be bent. Raise the lower guard
with the retracting handle and make sure it moves
freely and does not touch the blade or any other
part, in all angles and depths of cut.
11. Check the operation of the lower guard spring.
If the guard and the spring are not operating
properly, they must be serviced before use.
Lower guard may operate sluggishly due to
damaged parts, gummy deposits, or a build-up of
debris.
12. Lower guard should be retracted manually
only for special cuts such as "plunge cuts"
and "compound cuts." Raise lower guard by
retracting handle and as soon as blade enters
the material, the lower guard must be released.
For all other sawing, the lower guard should
operate automatically.
13. Always observe that the lower guard is
covering the blade before placing saw down
on bench or floor. An unprotected, coasting
blade will cause the saw to walk backwards,
cutting whatever is in its path. Be aware of the
time it takes for the blade to stop after switch is
released.
14. ALWAYS hold the tool firmly with both hands.
NEVER place your hand or fingers behind the
saw. If kickback occurs, the saw could easily jump
backwards over your hand, leading to serious
personal injury.
000194
15. Never force the saw. Push the saw forward at a
speed so that the blade cuts without slowing.
Forcing the saw can cause uneven cuts, loss of
accuracy, and possible kickback.
16. Use extra caution when cutting damp wood,
pressure treated lumber, or wood containing
knots. Adjust speed of cut to maintain smooth
advancement of tool without decrease in blade
speed.
17. Do not attempt to remove cut material when
blade is moving. Wait until blade stops before
grasping cut material. CAUTION: Blades coast
after turn off.
18. Avoid Cutting Nails. Inspect for and remove all
nails from lumber before cutting.
19. Place the wider portion of the saw base on that
part of the workpiece which is solidly
supported, not on the section that will fall off
when the cut is made. As examples, Fig. 1
illustrates the RIGHT way to cut off the end of
a board, and Fig. 2 the WRONG way. If the
workpiece is short or small, clamp it down. DO
NOT TRY TO HOLD SHORT PIECES BY HAND!
Содержание
- Hypoid saw scie hypoïde sierra circular 1
- Instruction manual manuel d instruction manual de instrucciones 1
- General power tool safety warnings 2
- Save all warnings and instructions for future reference 2
- Specifications 2
- 6 18 16 16 14 18 16 14 12 6 10 10 12 16 16 14 12 12 16 14 12 not recommended 3
- Ampere rating volts total length of cord in feet 3
- More than not more than awg 3
- Specific safety rules 3
- Table 1 minimum gage for cord 3
- V 25 ft 50 ft 100 ft 150 ft 3
- Adjusting depth of cut 6
- Functional description 6
- Save these instructions 6
- Symbols 6
- Warning 6
- Assembly 7
- Bevel cutting 7
- Hex wrench storage 7
- Removing or installing saw blade 7
- Sighting 7
- Switch action 7
- Operation 8
- Rip fence guide rule optional accessory 8
- Adjusting for accuracy of 90 and 45 cut vertical and 45 cut 9
- Hook optional accessory 9
- Maintenance 9
- Replacing carbon brushes 9
- Accessories 10
- Caution 10
- Hex wrench 10
- Makita limited one year warranty 10
- Rip fence guide rule 10
- Steel carbide tipped saw blades 10
- These accessories or attachments are recommended for use with your makita tool specified in this manual the use of any other accessories or attachments might present a risk of injury to persons only use accessory or attachment for its stated purpose if you need any assistance for more details regarding these accessories ask your local makita service center 10
- Conservez toutes les mises en garde et instructions pour référence future 11
- Consignes de sécurité générales pour outils électriques 11
- Spécifications 11
- 6 18 16 16 14 18 16 14 12 6 10 10 12 16 16 14 12 12 16 14 12 non recomman 13
- Intensi 13
- Nominale volts longueur totale du cordon en pieds 120 v 25 pi 50 pi 100 pi 150 pi 13
- Plus de pas plus de calibre a 13
- Ricain des fils 13
- Règles de sécurité particulières 13
- Tableau 1 gabarit minimum du cordon 13
- Avertissement 16
- Conservez ce mode d emploi 16
- Description du fonctionnement 16
- Réglage de la profondeur de coupe 16
- Symboles 16
- Assemblage 17
- Coupe en biseau 17
- Interrupteur 17
- Rangement de la clé hexagonale 17
- Retrait ou pose de la lame 17
- Visée 17
- Utilisation 18
- Crochet accessoire en option 19
- Entretien 19
- Garde parallèle règle de guidage accessoire en option 19
- Remplacement des charbons 19
- Réglage de précision pour les coupes de 90 et 45 coupes à angle droit et à 45 19
- Accessoires 20
- Garantie limitée d un an makita 20
- Advertencias de seguridad generales para herramientas eléctricas 21
- Clavija de conexión de ninguna forma no utilice ninguna clavija adaptadora con herramientas eléctricas que tengan conexión a tierra puesta a tierra 21
- Especificaciones 21
- Guarde todas las advertencias e instrucciones para su futura referencia 21
- La utilización de clavijas no modificadas y que encajen perfectamente en la toma de corriente reducirá el riesgo de que se produzca una descarga eléctrica 21
- Las clavijas de conexión de las herramientas eléctricas deberán encajar perfectamente en la toma de corriente no modifique nunca la 21
- Esto asegura que se mantenga la seguridad de la herramienta eléctrica 22
- Haga que una persona calificada repare la herramienta utilizando sólo piezas de repuesto idénticas 22
- A 6 a 18 16 16 14 18 16 14 12 6 a 10 a 10 a 12 a 16 16 14 12 12 a 16 a 14 12 no se recomienda 23
- Amperaje nominal 23
- Nimo para el cable 23
- Normas específicas de seguridad advertencias y precauciones 23
- S de calibre del cable awg 23
- S de no 23
- Tabla 1 calibre 23
- Volts longitud total del cable en metros 120 v 23
- Advertencia 26
- Guarde estas instrucciones 26
- Símbolos 26
- Accionamiento del interruptor 27
- Ajuste de la profundidad de corte 27
- Corte en bisel 27
- Descripción del funcionamiento 27
- Ensamble 27
- Guía visual 27
- Almacenamiento de la llave de allen hexagonal 28
- Desmontaje o instalación del disco de sierra 28
- Operación 28
- Ajuste de la precisión de corte de 90 y 45 corte de 45 y vertical 29
- Gancho accesorio opcional 29
- Guía lateral regla guía accesorio opcional 29
- Mantenimiento 29
- Accesorios 30
- Garantía limitada makita de un año 30
- Reemplazamiento de las escobillas de carbón 30
- Advertencia 32
- Makita corporation 32
- Warning 32
Похожие устройства
- Makita dbc3310 Инструкция по эксплуатации
- Makita dbc400 Инструкция по эксплуатации
- Makita dbc4010 Инструкция по эксплуатации
- Makita dbc4510 Инструкция по эксплуатации
- Makita uh200dwx Инструкция по эксплуатации
- Makita hp330dx100 Инструкция по эксплуатации
- Makita 4328 Инструкция по эксплуатации
- Makita 4329k Инструкция по эксплуатации
- Makita 5603r Инструкция по эксплуатации
- Makita 5903r Инструкция по эксплуатации
- Makita elm3800 Инструкция по эксплуатации
- Makita 5903rk Инструкция по эксплуатации
- Makita 6261dwple Инструкция по эксплуатации
- Makita 6317dwae Инструкция по эксплуатации
- Makita 6317dwde Инструкция по эксплуатации
- Makita 6347dwde Инструкция по эксплуатации
- Makita 6501 Инструкция по эксплуатации
- Makita 9237cb Инструкция по эксплуатации
- Makita 9069f Инструкция по эксплуатации
- Makita 9558hnk Инструкция по эксплуатации