![Makita JV0600K, 650 Вт [5/12] Functional description](/img/pdf.png)
Makita JV0600K, 650 Вт [5/12] Functional description
![Makita JV0600K, 650 Вт [5/12] Functional description](/views2/1175497/page5/bg5.png)
5
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Selecting the cutting action
1
011956
This tool can be operated with an orbital or a straight line
(up and down) cutting action. The orbital cutting action
thrusts the blade forward on the cutting stroke and
greatly increases cutting speed.
To change the cutting action, just turn the cutting action
changing lever to the desired cutting action position.
Refer to the table to select the appropriate cutting action.
Position
Cutting action
Applications
For cutting mild steel,
stainless steel and plastics.
For clean cuts in wood
and plywood.
Small orbit
cutting action
For cutting mild steel,
aluminum and hard wood.
For cutting wood and
plywood.
For fast cutting in aluminum
and mild steel.
Large orbit
cutting action
For fast cutting in wood
and plywood.
0
Straight line
cutting action
Medium orbit
cutting action
006582
Switch action
1
2
011957
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns
to the "OFF" position when released.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
Speed adjusting dial
1
011958
The tool speed can be infinitely adjusted by turning the
speed adjusting dial. Higher speed is obtained when the
speed adjusting dial is turned in the direction of number
5; lower speed is obtained when it is turned in the
direction of number 1.
Refer to the table to select the proper speed for the
workpiece to be cut. However, the appropriate speed
may differ with the type or thickness of the workpiece. In
general, higher speeds will allow you to cut workpieces
faster but the service life of the blade will be reduced.
Number on adjusting dial
4 - 5
Mild steel 3 - 5
Stainless steel 3 - 4
Aluminum 3 - 5
Plastics 1 - 4
Workpiece to be cut
Wood
006368
CAUTION:
• The speed adjusting dial can be turned only as far
as 5 and back to 1. Do not force it past 5 or 1, or the
speed adjusting function may no longer work.
1. Speed adjusting
dial
1. Switch trigger
2. Lock button
1. Cutting action
changing lever
Содержание
- Instruction manual 1
- Jig saw 1
- Jv0600 1
- Specifications 2
- Symbols 2
- Ec declaration of conformity 3
- General power tool safety warnings 3
- Save all warnings and instructions for future reference 3
- Jig saw safety warnings 4
- Save these instructions 4
- Warning 4
- Functional description 5
- Selecting the cutting action 5
- Speed adjusting dial 5
- Switch action 5
- Assembly 6
- Hex wrench storage 6
- Installing or removing saw blade 6
- Operation 6
- Bevel cutting 7
- Cutouts 7
- Front flush cuts 7
- Dust extraction 8
- Finishing edges 8
- Metal cutting 8
- Rip fence optional accessory 8
- Anti splintering device optional accessory 9
- Cover plate optional accessory 9
- Maintenance 9
- Optional accessories 9
- Anjo aichi japan 12
- Makita corporation 12
- Www makita com 12
Похожие устройства
- Makita 4350FCT, 720 Вт Инструкция по эксплуатации
- Cat Eye Rapid X (TL-LD700-F) Инструкция по эксплуатации
- Cat Eye NIMA 2 (SL-LD135-F) Инструкция по эксплуатации
- Makita BO3711 Инструкция по эксплуатации
- Cat Eye Orbit 2 (SL-LD150) Инструкция по эксплуатации
- Makita BO3710 Инструкция по эксплуатации
- Makita UB 1101 Инструкция по эксплуатации
- Makita DF330DWE Инструкция по эксплуатации
- Makita HR2470 Инструкция по эксплуатации
- Makita 8271DWAE Инструкция по эксплуатации
- Cat Eye Rapid X2 (TL-LD710-F) Инструкция по эксплуатации
- Makita UC4020A Инструкция по эксплуатации
- Cat Eye RAPID X3 (TL-LD720-F) Инструкция по эксплуатации
- Cat Eye Volt50 (HL-EL460RC) Инструкция по эксплуатации
- Makita UC3520A Инструкция по эксплуатации
- Cat Eye SOLAR (SL-LD210R) Инструкция по эксплуатации
- Makita UC3020A Инструкция по эксплуатации
- Cat Eye NIMA 2 (SL-LD135-R) Инструкция по эксплуатации
- Makita HG5012 Инструкция по эксплуатации
- Makita KP0810C Инструкция по эксплуатации
Скачать
Случайные обсуждения