Philips Avent scf356/00 [13/120] English

Note: If the progress indicator is on but does not ash, the baby bottle

warmer is still too warm to heat up another bottle. Please switch off the baby

bottle warmer, let it cool down for a few minutes and make sure you ll it

with fresh cold water.

Using the baby bottle warmer to warm baby food

1 Put the mains plug in the wall socket (Fig. 3).

2 Place a baby food container or jar centrally in the baby bottle

warmer (Fig. 15).

Note: You can leave off the lid of the food container or jar, so you can stir the

baby food during heating.

3 Fill the baby bottle warmer with the same amount of drinking

water as the amount of baby food you want to warm up (for

example, to warm up 125ml/4oz of baby food, you need to use

125ml/4oz of drinking water). If you want to warm up a large

amount of baby food, the maximum water level is approximately

1cm/0.4 inches under the rim of the baby bottle warmer (which

corresponds to adding 160ml/4.5oz of drinking water). An accurate

water level ensures correct warming performance. (Fig. 16)

4 Select the baby food warming setting (Fig. 17).

5 Press the on/off button to switch on the appliance. The light in the

progress indicator shows that the baby bottle warmer is on (Fig. 18).

Note: The baby bottle warmer starts warming up right after you press the

button. Due to the large variety of baby food consistencies, it is not possible

for the appliance to detect exactly how long the baby food should be warmed.

6 Theprogressindicatorstartstollgraduallywithwhitelightto

show the progress of the warming process. During the warming

process, do not take the jar or container out of the baby bottle

warmer but stir the baby food while the jar or container is still in

the baby bottle warmer (Fig. 19).

ENGLISH 13