Polaris VEGA TS 5.5 [21/24] Input current 25а

attached at the outlet! Make sure that the tap at the inlet is a

regular one, not a brass ball faucet/level tap, so that the

water flow can be finely controlled.

Common malfunctions that occur after prolonged, normal use of the heater

The water is very hot The water temperature can be reduced at the outlet by one of the

following actions:

 the water temperature can be lowered by pressing one of the

"supply choice buttons", going from a maximum supply to a

lower level;

 the water-flow can also be increased by means of the water

tap located at the heater's inlet; more "holes" can be opened in

the shower head to let more water pass through.

 The filter located at the inlet to the heater should also be

cleaned.

The water is very cold. The water temperature can be increased at the outlet by one of

the following actions:

 the water temperature can be raised by pressing one of the

"supply choice buttons", going from a minimal supply to a

higher level;

 the water-flow can also be decreased by means of the water

tap located at the heater's inlet;

 fewer "holes" can be left open in the shower head to let less

water pass through

The water is spraying out of

the shower head too

slowly and/or in the

wrong direction (not

into the shower).

The "holes" in the shower head must be cleaned.

VII. Unit cleaning

 Before cleaning, unplug the unit.

 Wipe it with soft wet cloth. Don’t use solvents or abrasives.

 Don’t scrape the body with hard instruments.

VIII. Specifications

Voltage 220 V

Input current 25А

Type of input alternating

Power 5.5 kW

Power consumption 5.5 kW/h

Protection class 1

Protection degree IPX4