Kaiser S 4570 XL — как подключить к водоснабжению и канализации: пошаговое руководство [8/84]

Превью страниц Страница 8 / 84

CONNECTING TO WATER SUPPLY AND

SEWERAGE NETWORK

Connecting the Aqua-Stop inlet hose

The inlet hose

equipped with Aqua-Stop System 1

is provided with double walls.

The Aqua-Stop System ensures blocking of water

supply in case the inlet hose has broken as well as

if the air gap between the hose itself and its

corrugated shell is filled with water.

Connect the appliance to the water mains with new

hose sets only. Never reuse old hose sets.

Water pressure must amount to 0,04 MPa (min.)

and 1 MPa (max.). In case the pressure is below

the minimum value, consult the Service Centre.

Pull the inlet hose completely out from

storage compartment located at the back of

the dishwasher.

While adjusting to the faucet, tighten the

screw 2 of the safety inlet hose (3/4-inch

thread).

Before starting the dishwasher, turn on the

faucet against the stop.

Connecting cold water

Connect the cold water inlet hose to the

threaded 3/4-inch connector. Make sure it

is fastened tightly.

If the water pipes are new or have not been used

for an extended period of time, let the water run to

make sure that the water is clear and free of

impurities.

If this precaution is not taken, there is a risk that

the water inlet can get blocked and damage the

appliance.