Yealink SIP-T48G [103/384] Descriptions web setting path

Yealink SIP-T48G [103/384] Descriptions web setting path
Appendix
97
Parameter
Permitted
Values
Descriptions
Web Setting Path
It takes effect after a reboot.
network.ipv6_icmp_v6.enable
(only applicable to SIP-T48G/T46G/T29G IP phones)
0 or 1
It enables or disables the IP phone to obtain
IPv6 network settings via SLAAC (Stateless
Address Autoconfiguration) method.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after a reboot.
Note: You are not allowed to configure this
parameter for
SIP-T42G/T41P/T27P/T23P/T23G/T21(P) E2 IP
phones. SLAAC is enabled on these phone
models. For more information on SLAAC, refer
to
Yealink IP Phones Administrator Guide.
Network->Advanced->ICMPv6
Status->Active
network.pc_port.enable
0 or 1
It enables or disables the PC (LAN) port.
0-Disabled
1-Auto Negotiate
The default value is 1.
It takes effect after a reboot.
Network->PC Port->PC Port Active

Содержание

Похожие устройства