Yealink SIP-T48G [12/384] Editing mac oriented cfg file

Yealink IP Phones Auto Provisioning Guide

The partial parameters in the Common CFG file are described as follows:

####################################################

## Common CFG File ##

####################################################

#!version:1.0.0.1

##File header "#!version:1.0.0.1" cannot be edited or deleted, and must be placed in

the first line. This template file is applicable to IP phones running firmware version 80 or

later. For more information on configuration parameters, refer to

Yealink_SIP-T2_Series_T4_Series_IP_Phones_Auto_Provisioning_Guide

. ##

######################################################

## Hostname ##

######################################################

network.dhcp_host_name =

######################################################

## PPPoE(Except T41P/T42G Models) ##

######################################################

network.pppoe.user =

network.pppoe.password =

######################################################

## Network Advanced ##

######################################################

##It enables or disables the PC port.0-Disabled,1-Auto Negotiation.

##The default value is 1.It takes effect after a reboot.

network.pc_port.enable =

##It configures the transmission mode and speed of the Internet (WAN) port.

##0-Auto Negotiate

##1-Full Duplex 10Mbps

##2-Full Duplex 100Mbps

##3-Half Duplex 10Mbps

##4-Half Duplex 100Mbps

##5-Full Duplex 1000Mbps (only applicable to SIP-T48G, SIP-T46G, SIP-T42G, SIP-T29G

and SIP-T23G IP phones)

##The default value is 0.It takes effect after a reboot.

network.internet_port.speed_duplex =

MAC-Oriented CFG file contains configuration parameters which are expected to be

updated per phone, such as the registration information.