Yealink SIP-T48G Инструкция по работе с сервером Autoprovision онлайн [45/384] 166933

Obtaining the Provisioning Server Address

2. Enter the URL, user name and password of the provisioning server in the Server

URL, User Name and Password fields (the user name and password are optional).

3. Click Confirm to accept the change.

After the above configuration is completed, the IP phone will connect to the configured

provisioning server and perform the auto provisioning process by one of the following

update modes: Power On, Repeatedly, Weekly, Auto Provision Now, SIP NOTIFY

Message and Multi-mode Mixed. For more information on these update modes, refer to

Configuring the Update Mode on Page 41.

Normally, many phone models may be deployed in your environment. To deploy many

phone models using a unified provisioning server, it is convenient for the administrator

to configure a unified provisioning server URL for different phone models. On the

provisioning server, many directories need to be configured for different phone models,

each with a unique directory name. Yealink IP phones support the following wildcards in

the provisioning server URL:

 $PN: it is used to identify the directory name of the provisioning server directory

where the corresponding configuration files are located

 $MAC: it is used to identify the MAC address of the IP phone.

The parameter ―auto_provision.url_wildcard.pn‖ is used to configure the directory name

the configuration files located. For more information on the parameter, refer to