Yealink SIP-T48G Инструкция по работе с сервером Autoprovision онлайн [53/384] 166933

Configuring the Update Mode

configuration files for different IP phones. To access the specified directory, you

need to provide the correct user name and password configured for the directory.

4. Configure unique activation codes and the provisioning server URLs on IP phones.

The activation code can be numeric string and special characters ―*‖, ‖#‖ with a

maximum of 32 characters.

The following are example configurations in the configuration file for IP phones:

autoprovision.1.code = *123

autoprovision.1.url = tftp://192.168.1.30/T23G_1/

autoprovision.2.code = *456

autoprovision.2.url = tftp://192.168.1.30/T23G_2/

5. Send the IP phone, specified activation code and associated user name and

password to each end-user.

6. Set up the IP phone, and then input the activation code after the phone startup.

The LCD screen will prompt the following dialog box:

7. Press the OK soft key to trigger the IP phone to perform auto provisioning.

The LCD screen will prompt the following input box:

8. Enter the user name and password in the User Name and Password field

respectively.

The entered user name and password must correspond to the directory where the

configuration files of the IP phone are located. If you enter invalid user name or

password, the LCD screen will prompt the message ―Wrong user name or

password!‖. The prompt message will disappear in two seconds, and the LCD

screen will return to the idle screen. You need to input the activation code again to

trigger the auto provisioning process.