Yealink SIP-T23P Руководство администратора онлайн [77/841] 166941

Getting Started

Parameters

Permitted Values

Default

Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin)->Network->WAN

Port->IPv4->DHCP IPv4 Client->Static DNS

network.primary_dns

IPv4 Address

Blank

Description:

Configures the primary IPv4 DNS server.

Example:

network.primary_dns = 202.101.103.55

Note: It works only if the value of the parameter "network.static_dns_enable" is set to

1 (On). If you change this parameter, the IP phone will reboot to make the change

take effect.

Web User Interface:

Network->Basic->IPv4 Config->Static IP Address->Primary DNS

Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN

Port->IPv4->DHCP IPv4 Client->Static DNS (Enabled) ->IPv4 Pri.DNS

network.secondary_dns

IPv4 Address

Blank

Description:

Configures the secondary IPv4 DNS server.

Example:

network.secondary_dns = 202.101.103.54

Note: It works only if the value of the parameter "network.static_dns_enable" is set to

1 (On). If you change this parameter, the IP phone will reboot to make the change

take effect.

Web User Interface:

Network->Basic->IPv4 Config->Static IP Address->Secondary DNS

Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN

Port->IPv4->DHCP IPv4 Client->Static DNS (Enabled) ->IPv4 Sec.DNS

To configure static DNS address when DHCP is used via web user interface:

1. Click on Network->Basic.

2. In the IPv4 Config block, mark the DHCP radio box.

3. In the Static DNS block, mark the On radio box.