Moxa EDS-G512E-4GSFP-T [31/116] Port event settings

Managed Ethernet Switch (UI_2.0_FW_5.x) Featured Functions

3-18

Port Event Settings

Port Events are related to the activity of a specific port.

Port Events Warning e-mail is sent when…

Link-ON The port is connected to another device.

Link-OFF The port is disconnected (e.g., the cable is pulled out, or the opposing

device shuts down).

Traffic-Overload The port’s traffic surpasses the Traffic-Threshold for that port (provided

this item is Enabled).

Traffic-Threshold (%) Enter a nonzero number if the port’s Traffic-Overload item is Enabled.

Traffic-Duration (sec.) A Traffic-Overload warning is sent every Traffic-Duration seconds if the

average Traffic-Threshold is surpassed during that time period.

Four response actions are available on the EDS E series when events are triggered.

Action Description

Trap The EDS E series will send a notification to the trap server when an event is triggered.

E-Mail The EDS E series will send a notification to the email server defined in the Email Setting.

Syslog The EDS E series will record a syslog to syslog server defined in Syslog Server Setting.

Relay The EDS E series supports digital inputs to integrate sensors. When an event is triggered,

the device will automate alarms through the relay output.

Severity

Severity Description

Emergency System is unusable

Alert Action must be taken immediately

Critical Critical conditions

Error Error conditions

Warning Warning conditions

Notice Normal but significant condition

Information Informational messages

Debug Debug-level messages

NOTE

The Traffic

-Overload, Traffic-Threshold (%), and Traffic-

Duration (sec.) Port Event items are related. If you

Enable

the Traffic-Overload event, then be sure to enter a nonzero Traffic-

Threshold percentage, as well as a

Traffic

-Duration between 1 and 300 seconds.