Moxa EDS-P506A-4PoE-SS-SC-T [13/15] Auto mdi mdi x connection

- 13 -

Specifications of the EDS-P506A-4PoE Series

Auto MDI/MDI-X Connection

The Auto MDI/MDI-X function allows users to connect the

EDS-P506A-4PoE’s 10/100BaseTX ports to any kind of Ethernet device,

without needing to pay attention to the type of Ethernet cable being used

for the connection. This means that you can use either a straight-through

cable or cross-over cable to connect the EDS-P506A-4PoE to Ethernet

devices.

Fiber Ports

The Moxa EDS-P506A-4PoE’s fiber ports operate at a fixed 100 Mbps

speed and full-duplex mode to provide excellent performance. The fiber

ports are factory-built as either multi-mode or single-mode SC/ST

connectors. Therefore, you should use fiber cables that have SC/ST

connectors at both ends. When plugging the connector into the port,

make sure the slider guide is positioned to the right side such that it fits

snuggly into the port.

The 100 Mbps fiber ports are switched ports and perform as a domain to

provide a high bandwidth backbone connection that supports long fiber

cable distances (up to 5 km for multi-mode, and 40 km for single-mode)

for installation flexibility.

Specifications

Technology

Standards

IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1w,

802.1Q, 802.1p, 802.1X, 802.3ad, 802.3af/at

Protocols

IGMPv1/v2, GVRP, SNMPv1/v2c/v3, DHCP

Server/Client, BootP, TFTP, SNTP, SMTP, RARP,

GMRP, LACP, RMON, HTTP, HTTPS, Telnet,

Syslog, DHCP Option 66/67/82, SSH, SNMP

Inform, Modbus/TCP, LLDP, IEEE 1588 PTP, IPv6

MIB

MIB-II, Ethernet-Like MIB, P-BRIDGE MIB,

Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON

MIB Group 1,2,3,9

Processing Type

Store and Forward

Flow Control

IEEE802.3x flow control, back pressure flow

control