MartinLogan Descent [16/20] Faq troubleshooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

MartinLogan Descent [16/20] Faq troubleshooting

MartinLogan Descent [16/20] Faq troubleshooting
16 Frequently Asked Questions & Troubleshooting
FREQUENTLY ASKED QUESTIONS & TROUBLESHOOTING
How do I clean my subwoofer?
Use a dust free cloth or a soft brush to clean your subwoofer.
We recommend a specialty cloth (available through the
Xtatic shop at www.martinlogan.com) that cleans better than
anything else we have tried.
Is it safe to set things on my subwoofer?
While your Descent is designed with a durable, stain-resistant
surface, we advise you not to set anything on your Descent—
especially containers holding liquids.
Is there likely to be any interaction between my sub-
woofer and the television in my Audio/Video system?
Yes. The Descent subwoofer doesn’t use shielded drivers.
Since the drivers are arrayed to balance the reactive force of
the woofers, their magnetic fields are also balanced. We
recommend 3 feet between the Descent subwoofer and
video components that are susceptible to magnetic fields.
Will my electric bill go 'sky high' by leaving my subwoofer
plugged in all the time?
No. The Descent, when the power switch is set to ‘Auto’
or ‘Standby’, will draw about 13 watts when idle.
Should I unplug my subwoofer during a thunderstorm?
Yes, or before. It's a good idea to disconnect all of your
audio/video components during stormy weather.
No Output
• Check that all your system components are turned on.
• Check that the power switch above the AC cord recep-
tacle on the lower-back of the Descent is turned on.
• Check that the power switch on the front of the
Descent is set to either 'Auto' or 'On'.
• Check your wires and connections.
• Check all interconnecting cables.
• Make sure the level control is not turned all of the way
down.
• Turn off and unplug the Descent and check the fuse
near the AC power cord receptacle on the back. If the
fuse has blown, replace it with a matching, 7-Amp Slow-
Blow fuse.
• If the problem persists, contact your dealer.
Muddy Bass
• Check placement. Try moving the subwoofer closer to
the front and side walls.
• Check the type of feet that are being used. Try installing
the ETC spikes.
• Decrease the level.
• Decrease the 25Hz level.
• Check your processor setup.
• If the problem persists, contact your dealer.
Hums or Unusual Sounds
• Turn the Descent off, unplug all signal inputs, turn the
Descent back on and turn up the level. If the problem
disappears, the hum is originating elsewhere in your
system.
• If the problem persists, contact your dealer.
Frequently Asked Questions Troubleshooting

Содержание

Похожие устройства

Скачать