Moxa IMC-101G [5/14] Wall mounting optional

Moxa IMC-101G-T [5/14] Wall mounting optional
- 5 -
Wall Mounting (Optional)
For some applications, you will find it convenient to mount the IMC-101G
on the wall, as illustrated below.
STEP 1:
Remove the aluminum
DIN
-rail attachment plate
from
the IMC-101G and
then attach the wall
-
mount
plates, as shown in the
diagrams below.
STEP 2:
Mounting
the IMC-101G on the wall requires four
screws. Use the IMC
-101G, with wall-mount plates
attached, as a guide to mark the correct locations of
the
four
screws. The heads of the screws should be less
than 6.0 mm
in diameter, and the shafts should be less
than 3.5 mm in diameter, as shown in the figure
on
the
right.
NOTE
Test the screw head and shank size by inserting the screw into
one of the keyhole
-shaped apertures of the wall-
mounting plates,
before it is screwed into the wall.
Do not screw the screws in all the wayleave a space of about 2 mm to
allow room for sliding the wall-mount panel between the wall and the
screws.
STEP 3:
Once the screws are fixed in the wall,
insert the four screw
heads through
the
large parts of the
keyhole
-
shaped apertures and then
slide
the IMC-101G downwards, as
indicated below. Tighten the four
screws for added stability.

Содержание

Скачать