Moxa IMC-P101-M-ST-T [10/14] Dip switch setting

- 10 -

Cable Wiring

A A

B B

ATTENTION

This is a Class 1 Laser/LED product. Do not stare into the

Laser Beam.

Redundant Power Inputs

Both power inputs can be connected simultaneously to live DC power sources.

If one power source fails, the other live source acts as a backup, and

automatically supplies all of the Moxa Industrial Media Converter’s power

needs.

DIP Switch Setting

1234567

ON DIP

DIP No. Function ON OFF

1 Auto Negotiation Enable* Disable

“ON”: Enables “Auto Negotiation” function, the speed and duplex states for

each port link segment are automatically configured using the highest

performance interoperation mode.

“OFF”: Disables “Auto Negotiation” function, the speed and duplex states

depend on the manual setting configuration.

2 Force TP Speed 100Mbps* 10Mbps

(Only when Auto Negotiation is disabled)

“ON”: Forces 100Mbps on Ethernet port.

“OFF”: Forces 10Mbps on Ethernet port.

3 Force TP Duplex Full Duplex* Half Duplex

(Only when Auto Negotiation is disabled)

“ON”: Forces Full Duplex on Ethernet port.

“OFF”: Forces Half Duplex on Ethernet port.

4 Link Fault Pass Through Enable* Disable

“ON”: Enables “Link Fault Pass Through”, the link status on the TX port will

inform the FX port of the same device and vice versa.

“OFF”: Disables “Link Fault Pass Through”, the link status on the TX port

will not inform the FX port.

5 Operating Mode Store-and-Forward* Pass Through