Moxa IMC-P101-M-ST-T [11/14] Led indicators
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa IMC-P101-M-ST-T [11/14] Led indicators

Moxa IMC-P101-M-SC-T [11/14] Led indicators
- 11 -
DIP No. Function ON OFF
“ON”: Selects “Store-and-Forward” mode, begins to forward a packet to a
destination port after an entire packet is received. The latency depends
on the packet length.
“OFF”: Selects “Pass Through” mode, operates with the minimum latency.
Both transceivers are interconnected via internal MIIs and the
internal switch engine and data buffer are not used.
Note: With “Pass Through” mode enabled, the Ethernet port and fiber port
should transmit at 100 Mbps, which is equivalent to full duplex mode.
6 PSE Disable Enable*
PSE: Power Source Equipment.
“ON”: Disables “PSE”, IMC-P101 series do NOT provide power to PD
(Powered Device).
“OFF”: Enables “PSE”, IMC-P101 series provides power to PD (Powered
Device).
7 P.R.R. Enable Disable*
P.R.R.: Power Remote Reset
“ON”: Enables “P.R.R” function, when fiber port link down 3 seconds and
“PSE” setting is enabled, IMC-P101 series STOP providing power to
PD (Power Device) which means the PD power will turn OFF. After 1
second later, IMC-P101 series start to continue provide power to PD,
and then the PD power turn back ON for reset PD.
“OFF”: Disables “P.R.R” function, no reset PD function.
(*): Default DIP switch setting.
ATTENTION
After changing the DIP switch setting, you will need to
power off and then power on the IMC-P101 to activate the
new setting.
LED Indicators
The front panel of Moxa Industrial Media Converter contains several LED
indicators. The function of each LED is described in the table below.
LED Color State Description
ON
Power is being supplied to power input
PWR1
PWR1 Green
OFF
Power is not being supplied to power
input PWR1
ON
Power is being supplied to power input
PWR2
PWR2 Green
OFF
Power is not being supplied to power
input PWR2
ON Fiber port is active.
Blinking Data is being transmitted or received.
Fiber
Link/Act
Green
OFF Fiber port is inactive.
ON PSE is enabled.
1 Flash Low Signature Resistance
PSE
Indicator
Green
2 Flash High Signature Resistance

Содержание

Похожие устройства

Скачать