Moxa UPort 2210 [2/2] Installing the uport 2000 series hardware
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa UPort 2210 [2/2] Installing the uport 2000 series hardware

Moxa UPort 2410 [2/2] Installing the uport 2000 series hardware
– 4 – – 5 – – 6 –
www.moxa.com/support
The Americas:
+1-714-528-6777 (toll-free: 1-888-669-2872)
Europe:
+49-89-3 70 03 99-0
Asia-Pacific:
+886-2-8919-1230
China:
+86-21-5258-9955 (toll-free: 800-820-5036)
2015 Moxa Inc. All rights reserved.
4. Installing the UPort 2000 Series Hardware
WARNING
1.
This unit is not meant to be sold to consumers. It will
only be shipped to manufacturers or factories.
2.
This unit should be installed or set up by a qualified
service technician.
1. Connect the UPort to the PC using the USB cable.
2. After powering on your PC, Windows will automatically detect
the UPort.
3. Case 1: The UPort Driver is Certified
If the UPort driver that you installed has been certified by
Microsoft, the UPort and the UPort’s serial ports will be
installed automatically when you plug the UPort into your
computer’s USB port.
Case 2: The UPort Driver is NOT Certified
If the UPort driver that you installed has not been certified by
Microsoft, then plugging the driver into your computer’s USB
port will activate the UPort installation program. The first part
of the installation procedure installs the software for the UPort
itself (the second part of the procedure installs the serial ports).
Click Next to start the installation.
4. Select Install the software automatically
(Recommended).
5. The next window that opens cautions you that although this
software has not passed Windows logo testing, this driver has
already been tested and shown that it can support Windows OS.
Click Continue Anyway to proceed. Then, click Finish to
complete the driver installation.
6. Repeat steps 3 to 5 until all COM ports have been installed.
Installing the Linux Driver
Obtain the driver file from the Document and Software CD, or from
the Moxa website at http://www.moxa.com
. To install and load the
Linux drivers, execute the following commands from the Linux
prompt:
# mount /dev/cdrom /mnt
# cd /
# mkdir moxa
# cd /moxa
# cp /mnt/cdrom/<driver directory>/
driv_linux_uport2000_vx.x_build_xx.tgz /moxa
# tar -xvfz driv_linux_uport2000_vx.x_build_xx.tgz
# cd /moxa/mxuport2000
# make clean
# make install
# modprobe mxuport2000
6. Serial Port Pin Assignments
The serial ports on the UPort 2000 use male DB9 connectors. Refer
to the following table for the RS-232 pin assignments.
Male DB9
Pin
1
2
3
4
5
6
7
8
Power Input Specifications
The UPort 2210 and UPort 2410 both support 5 VDC bus power.

Содержание

Похожие устройства

Скачать