Moxa UPort 1250I [30/50] Uport 1200 1400 1600 series driver installation

UPort 1200/1400/1600 Series Driver Installation

2-18

Fixed-base COM Mode” allows users to specify which COM number will be assigned first. In addition, COM

numbers are assigned sequentially, and are not tied to specific UPort converters. For example, assume that you

have set COM10 as the first COM number that will be assigned. If UPort D1 is plugged into your computer first,

your computer will assign COM10 and COM11 to the UPort’s serial ports. When UPort D2 is plugged in, the

computer will assign COM numbers COM12 and COM13.

If both UPorts are unplugged from the computer, and then UPort D2 is plugged back in, the computer will now

assign COM10 and COM11 to the UPort’s serial ports. When UPort D1 is plugged back in, COM numbers COM12

and COM13 will be assigned the UPort’s serial ports.

When “Fixed-base COM Mode” is enabled for the first time, all COM port numbers and serial port

parameters will be reset to their default values. You can then set the COM numbers and configuration

parameters to the values needed for your application.