M-Audio Lagoon Инструкция по эксплуатации онлайн [19/28] 18943

Hint: S/PDIF signals are always related to audio channel number 1 and channel

number 2. Therefore only device Lagoon In (1/2) and device Lagoon Out (1/2) are

suitable when using S/PDIF signals.

Hint: The LAGOON card operates with one sample rate at a time only. Opening

devices with different sample rates will fail.

ASIO Page

In the ASIO page you can determine the Buffer size of the ASIO LAGOON driver.

A smaller Buffer size results in a smaller latency time (e.g. the time needed to hear a

sound after you press the play button in your application software), but may lead to

dropouts if your system is too slow to handle such short latency times. Increasing the

Buffer size may prevent dropouts, but also increases latency time. It is up to you to

find out the best settings for your system. If you are not experienced in optimizing

your system use the default

Buffer size. Remember that changes will only take effect

after rebooting Windows.

There are three states the ASIO LAGOON driver may enter:

Closed, Blocked and

Playing. If the ASIO driver is not in use it is Closed. If there is an MME device

opened the ASIO driver is Blocked, since opening the MME driver and the ASIO

driver at the same time is not allowed. Playing indicates that the ASIO driver is in

use by an application. In that case

Position counts up with every sample transferred

by the driver.

Hint: If your application software supports both ASIO and MME, use ASIO as this

driver has some advantages compared to the MME driver.

Hint: When using the ASIO driver, Clock source and Sample rate may no longer be

set on the LAGOON Tools

General page. Use your application software to do this.