M-Audio Lagoon Инструкция по эксплуатации онлайн [24/28] 18943

Frame error

Error Possible Reasons and Remarks

Overflow

Driver version

mismatch

DSP error

Loss of realtime

MIDI Errors

MIDI errors are related to the MIDI input of the LAGOON card. Receiving MIDI

data is possible in two ways: MIDI data coming in from the LAGOON MIDI cable

connected to your external MIDI equipment or MIDI data coming in from the ADAT

Sync cable connected to your ADAT recorder.

There was an error in receiving MIDI bytes. The

start bit, the stop bit, or both of them are not

detected correctly. Check your MIDI cable and

external equipment.

Some of the incoming MIDI data had to be discarded.

Perhaps your PC was unable or too busy to process

MIDI data fast enough.

Error Possible Reasons and Remarks

1. The version number of the driver and the version

number of the LAGOON Tools are different.

Download the newest LAGOON Tools and driver

from http://www.m-audio.com.

2. You are using a LAGOON card which does not fit the

driver. Contact M-Audio tech support for a correct

driver version.

Something inside the DSP went wrong. Please shut

down Windows and power cycle your PC. If this

error appears again, contact M-Audio tech support.

The DSP was unable to transmit as many data as

necessary to the PC within a given time. Probably

some other PCI card blocks the PCI bus heavily.

Refer to Troubleshooting.

General Errors

General errors are related to the basic function of the LAGOON card and its driver.