Moxa V2426-W7E [22/48] Connecting a ps 2 keyboard and mouse

V2406/2422/2426 Hardware Manual Hardware Connection Description

3-7

Connecting a PS/2 Keyboard and Mouse

Your V2406/2422/2426 embedded computers come with a PS/2 mini-DIN connector to connect to a PS/2

keyboard and PS/2 mouse. This 6-pin mini-DIN connector has the pin assignments shown below.

PS/2 Connector

Pin No. Signal Definition

1 PS/2 Keyboard Data

2 PS/2 Mouse Data

3 GND

4 VCC

5 PS/2 Keyboard Clock

6 PS/2 Mouse Clock

Use the Y

-type cable to convert the

mini

-DIN connector into two 6-pin

mini

-DIN connectors to connect both a

PS/2 keyboard and PS/2 mouse at the

same time. You may also use the USB

ports to connect your USB

based keyboard

and mouse.

ATTENTION

Without a Y

type cable, the PS/2 connector on the V2406/2422/2426 can only work with a PS/2 keyboard. A

PS/2 mouse will not function when directly connected to the PS/2 connector on the V

2406/2422/2426

embedded computers.

Connecting to a USB Device

The V2406/2426 comes with 1 USB 2.0 host with M12 connectors on the front panel, and 2 USB 2.0 hosts with

type A connector on the rear panel; the V2422 comes with 4 USB 2.0 hosts on the front panel and 2 USB 2.0

hosts on the rear panel, all with type A connector. These ports can be used for an external flash disk or hard

drive for storing large amounts of data. You can also use these USB ports to connect to a keyboard or a mouse.

See the following figures for the locations of the USB ports and the M12 connector pin assignment.