Moxa MPC-2157X-T [20/65] Brightness mode

MPC-2150 Hardware Hardware Connection Description

3-7

The MENU button operates like a power button, with which users may start up or shut down the computer.

Holding the button for 1 second will power on the system, and the button will light up a solid green. To power

off the MPC-2150, press and hold the Menu button for 4 seconds to enter standby, hibernation, or system

shutdown mode, depending on the power management settings you have set in your operating system. If a

hard shutdown is required because of technical problems, press and hold the Menu button for 10 seconds to

forcibly power off the system.

Brightness

Two brightness buttons are available for brightness control. Press the + button to increase the brightness of the

panel, and the – button to decrease the brightness.

INFO

The INFO button returns the current system status for various components, such as power for AC input and

main board, CPU, memory, chipset and VGA output. Pass will indicate that the subsystem is working well. An

error message will be shown when the system is not working. CPU, memory, chipset and VGA output will be

detected only at the bootup stage; any changes or failures that occur after that will not be registered by the

system. The AC power and mainboard power (Main Board Power) options will be continuously detected, even

after the computer has been booted up.

(Brightness Mode)

Touch the button to switch between DAY, DUSK, and NIGHT display modes.

Upon touching the button, the brightness configuration will be overwritten to day, dusk, or night modes.

(Storage)

A storage icon can also be found on the panel. When data access occurs, it will display a blinking red status.

NOTE

The

display of the MPC-2150 can also be controlled with a series of commands. For a list of the available

commands and their uses,

refer to Appendix B: Display Control Interface Commands for details