M-Audio Dman PCI [19/29] Wss properties page

Mute is selected, it will completely override the volume and balance settings

for that channel. When Mute is not active, the volume and balance settings are

restored.

NOTE: When the drivers are first installed, the Daughterboard and CD-

ROM channels of the mixer are muted by default. This is to prevent any

excess noise from entering the DMAN PCI if either or both of those devices

are not installed/connected. If you install either device, make sure you

unmute them in the mixer or you will not hear them.

IMPORTANT: The inside of the computer is a very noisy place and noise

from other computer components may leak into any audio sound card. For

best signal-to-noise performance, mute or turn down the playback volume

levels of any devices not currently in use. Multimedia-grade CD-ROM dri-

ves are notoriously noisy and so are inputs that have nothing connected to

them (such as an unused daughterboard connector or Line In). We recom-

mend muting each of these when not being used.

WSS Properties Page

The Windows mixer is configured and customized via its property page. To

access this page, select Options | Properties from the mixer’s menu. The proper-

ty page will immediately appear.

The properties page provides three settings:

1. Mixer Device. This selects which audio card will be controlled by the

Windows mixer. If the DMAN PCI is the only audio card installed in you

system, it will probably be your only choice.

2. “Adjust volume for.” This selects whether the Master Playback or Record

mixer will be displayed.

3. “Show the following volume controls.” This lets you select which audio