M-Audio DigiPatch [14/20] Exit test mode midi source

1 = success, 0 = failure

Note: This test will force the unit to rebuild the serial EEPROM con-

tents regardless of how test mode is exited.

MIDI I/O Test (MIDI + Prog ▼)

This test requires that a midi cable be connected between the

DigiPatch Midi Out jack and Midi In jack before it begins. It per-

forms a two phase midi loop back test.

The result is displayed in the tar

get indicator as follows:

1 = success, 0 = failure

Exit Test Mode and Reinitialize EEPROM (MIDI + Target ▼)

Press this button combination when powering up, or while in test

mode to rebuild the serial EEPROM. Important: This test is destruc-

tive and will erase all programs, MIDI settings, and edit buffer

contents — so do NOT perform this test unless you have saved

your patch information by way of a MIDI bulk data dump.

After the process is complete the unit should boot normally with all

factory programs and midi settings restored to their original settings.

Exit Test Mode (MIDI + Source ▼)

Press this button combination to exit test mode without re-initializ-

ing the serial EEPROM.