Moxa VPort P26A-1MP [59/82] Video performance

Moxa VPort 26A-1MP System Configuration

4-31

Privacy Mask

Setting Description Default

Enable Enable privacy mask function Off

Mask 1/2/3

Enable up to 3 different privacy mask area. Once enabled, you

can drag mask area directly in the camera scene

unchecked

NOTE

There is no way to recover masked video no matter in live or playback, make sure you use this function

carefully

Video Performance

The VPort IP camera can send a maximum of three simultaneous video streams: two H.264 and one MJEPG. In

fact, the VPort IP camera has two encoder engines. The first encoder engine can generate one H.264 video

stream, and this H.264 video stream is a completely independent video stream, which means its resolution,

FPS and video quality can be configured independently. The second encoder engine can generate one H.264

video stream and one MJPEG video stream. Because both the H.264 and MJPEG video streams come from the

same encoder engine, their resolution must be the same, but the FPS and the Video Quality can be configured

separately. The administrator can set the Resolution, Max. Frame Rate and Video Quality on this web page.

Resolution Type

For meeting different CCTV resolution requirement, there are NTSC or PAL mode can be selected.

NOTE

Due to there is only one video source, different resolution will have different viewing angle.

Streams

Setting Description Default

Enable the video

streams

To enable the VPort to send this video streams or not. Enable stream 1:

H.264 and stream 2:

MJPEG

Codec Type

This codec type shows the codec of each video stream.

Resolution

The VPort 26A-1MP supports 5 different resolutions: WXGA, HD, SVGA, Full D1, 4CIF, VGA, CIF, and QCIF.

Setting Description Default

Select the image size 8

image resolutions (size) are provided. The administrator can

choose each option with NTSC or PAL modulation.

1280x720