Moxa VPort 66 Руководство по быстрой установке онлайн [10/15] 171707

- 10 -

Step 5: Close the top cover and screw in the 4 top cover screws

immediately (5.5 kgf-cm torque is recommended)

NOTE

The dry bag will absorb moisture inside the camera to prevent

oisture from condensing on the inside of the

transparent dome

when

the camera is used in low temperature environments.

Install the dry bag and replace the camera’s top cover

immediately after o

pening the dry bag and exposing it to the

atmosphere.

Step 6: Install the VPort 66-2MP on the VP-520LB mounting kit

1. Loosen the 3 socket set screws on the VP-520LB tube.

2. Loosen the 4 Phillips screws on the front cover, the stud bolts inside

the front cover, and the ground screw inside the box, and then pull

the bolt from the hinge to separate the front cover and the box.