Moxa VPort P06-1MP-M12-CAM42-T [14/83] Client settings

VPort ONVIF Profile S Accessing the VPort’s Web-based Manager

3-3

Digital PTZ (supported by VPort 06-2, P16-2MR, 36-2L Series)

Enable the digital PTZ function by selecting the checkbox above the image view. Once the function has been

enabled, you can zoom in and out on the image using the mouse wheel, and implement Pan and Tilt by pressing

right button and dragging the cursor to the spot in the image you would like to focus on.

NOTE

The Pan and Tilt functions c

an only be used after zooming in on an image.

Client Settings

The following functions can be configured in Client Settings.

1. Display profile: Shows the profile currently being used. There are 3 or 4 default profiles: profile01,

profile02, profile03 and profile04. Each profile refers to one independent video stream with a unique codecs,

resolution, frame rate (FPS), and video quality. If you need to, you can create additional profiles, but keep

in mind that more profiles mean more video streams. Enabling too many video streams could reduce the

frame rate and overall video performance of each stream. For configuring the profile, go to System

Configuration/profile.

2. Media options: Some VPort IP cameras support a line-in or microphone audio input. In this case, you can

select from the following options: Video/Audio, Video Only, Audio Only.

3. Protocol Options: Choose one of four protocols to optimize your usage—Multicast (RTSP or Push) or

Unicast (UDP, TCP, HTTP).

• Multicast Protocol can be used to send a single video stream to multiple clients. In this case, a lot of

bandwidth can be saved since only one video stream is transmitted over the network. However, the

network gateway (e.g., a switch) must support the multicast protocol (e.g., IGMP snooping). Otherwise,

the multicast video transmission will not be successful.

 RTSP: Enable the multicast video stream to be sent using RTSP control, which means the multicast

video stream will be sent only if it receives the client’s request.

 Push: Enable the multicast video stream to be sent using Push control, which means that after this

setting is selected, the multicast video stream will be sent continuously even without any client

requests.